HELP! GSL-SE Oill Cooler on 12A Engine
#1
www.RE4LIFE.com
Thread Starter
Join Date: Mar 2004
Location: San Francisco, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
HELP! GSL-SE Oill Cooler on 12A Engine
Please Help!
I am replacing the original 12A Oil Cooler with a GSL-SE Oil Cooler but the lower fitting hose doesn't connect right. The hose gets "bend" as shown in the pics. What should I do? Any suggestions are greatly appreciated! Thanks Much!!
I am replacing the original 12A Oil Cooler with a GSL-SE Oil Cooler but the lower fitting hose doesn't connect right. The hose gets "bend" as shown in the pics. What should I do? Any suggestions are greatly appreciated! Thanks Much!!
#5
www.RE4LIFE.com
Thread Starter
Join Date: Mar 2004
Location: San Francisco, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Thank you all for your help.
Racing Beat's braided hoses solved the problem.
Thank you, TopGunM2K!
wackyracer, thank you for your offer!
mazdaverx713b, relocating the oil cooler to the SE's location
will be the major construction. The set up is totally different
between 12A and 13B so I took easier way by replacing hoses.
Thank you for your suggestion.
Koh
Racing Beat's braided hoses solved the problem.
Thank you, TopGunM2K!
wackyracer, thank you for your offer!
mazdaverx713b, relocating the oil cooler to the SE's location
will be the major construction. The set up is totally different
between 12A and 13B so I took easier way by replacing hoses.
Thank you for your suggestion.
Koh
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM