1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

help electrical problem

Thread Tools
 
Search this Thread
 
Old 07-18-07, 06:50 PM
  #1  
Junior Member
Thread Starter
 
7T9rex's Avatar
 
Join Date: Apr 2007
Location: clarksville tn
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
help electrical problem

i have a 79 rx7 that i had to put back together because the guy that i bought it from took it all apart to paint it ...everything from the tail lights to the head ligths ...well the problem is that when i turn the blinkers on my tail lights wount blink but the license plate lights blink together...when i turn the head lights on ..one comes on half way and the other about an inch and when i turn them off they didnt come back down..the license plate lights stay one all the time even when i take the key off the ign..one of the dash light stays on and wount go off...its just a nightmare....help please....
luis
Old 07-18-07, 11:44 PM
  #2  
Lives on the Forum

iTrader: (13)
 
Rx-7Doctor's Avatar
 
Join Date: Jul 2004
Location: Oregon
Posts: 10,584
Likes: 0
Received 11 Likes on 10 Posts
Originally Posted by 7T9rex
i have a 79 rx7 that i had to put back together because the guy that i bought it from took it all apart to paint it ...everything from the tail lights to the head ligths ...well the problem is that when i turn the blinkers on my tail lights wount blink but the license plate lights blink together...when i turn the head lights on ..one comes on half way and the other about an inch and when i turn them off they didnt come back down..the license plate lights stay one all the time even when i take the key off the ign..one of the dash light stays on and wount go off...its just a nightmare....help please....
luis
Unfortuneatly there is no quick answer that anyone will be able to give you. You will need to either obtain a haynes manual or download a copy of the FSM per member trochoids link. Then you will be able to look at the wiring diagram.

I would suspect that there are wires that are grounded that should not be. Also for the headlamp not going down, check the fuseable links in the engine bay. Just take your time and address one issue at a time.
Old 07-18-07, 11:47 PM
  #3  
Junior Member
Thread Starter
 
7T9rex's Avatar
 
Join Date: Apr 2007
Location: clarksville tn
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rx7doctor
Unfortuneatly there is no quick answer that anyone will be able to give you. You will need to either obtain a haynes manual or download a copy of the FSM per member trochoids link. Then you will be able to look at the wiring diagram.

I would suspect that there are wires that are grounded that should not be. Also for the headlamp not going down, check the fuseable links in the engine bay. Just take your time and address one issue at a time.
thanks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
firzen
2nd Generation Specific (1986-1992)
9
09-15-15 12:04 PM



Quick Reply: help electrical problem



All times are GMT -5. The time now is 11:26 AM.