I know that this topic has been covered numerous times but I cannot find my answer. I replaced the M and the S and bled the system. The clutch will not engage while depressed. I can see the fork is being moved while the clutch is depressed. If I use my hand while it is being depreesed I can move the fork farther. I am guessing that the rod from the slave is not moving it far enough. Wacky racer stated that he extended the pushrod from the slave about an inch but there were no instructions how in one of the threads I searched. I can shift into all gears when engine is off without depressing the clutch. The clutch pedal height is correct according to manual. I dont think that my rod from the clutch into the master can be extended much farther. What do I do

 

You have lose clips on your clutch fork,it looks like you have to pull your tranny out.that why your clutch does not engage when you depress the pedal.

 

Or your clutch fork has bent/snapped.

Either way you need to take the tranny out and take a look at the fork/clips.

Cam...