1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Help!!!!!!!!!!!!!

Thread Tools
 
Search this Thread
 
Old Oct 11, 2003 | 08:32 PM
  #1  
layugml's Avatar
Thread Starter
Newbie
 
Joined: Oct 2003
Posts: 1
Likes: 0
From: VIRGINIA Beach
Exclamation Help!!!!!!!!!!!!!

I need help fixing my 1983 RX-7 with a 12A engine and a 4 barrel carburetor. When the engine is hot, and we shut off the ignition, when we try to start it again, but it will not start back up. If there's anyone familiar with this problem your advice will be greatly appreciated.
Reply
Old Oct 12, 2003 | 08:55 AM
  #2  
82rx7dream's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 81
Likes: 0
From: Ontario,Canada
poor compression, at least thats what was wrong with mine. Mine would not start untill it cooled down. A little ATF down the carb sometimes restores a little compression, enough to get it going BUT not a fix. Might want to get a compression test done.
Reply
Old Oct 12, 2003 | 11:50 AM
  #3  
357's Avatar
357
Stratoflattener
Tenured Member 20 Years
 
Joined: Apr 2002
Posts: 475
Likes: 0
From: Lincoln, NE; Cambridge, MA
If you made the mistake I did, and are using gas with ethanol in it, it could be vapor-locking. Due to their design, rotaries (with the exception of high-boost turbos) like to run on the lowest octane gas you can give them. I personally run 87 octane.
Reply
Old Oct 12, 2003 | 04:13 PM
  #4  
QuagmireMan's Avatar
Registered Offender
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 1,047
Likes: 0
From: Ohio
high boost run on low octane where did you hear that?
Reply
Old Oct 12, 2003 | 05:40 PM
  #5  
smnc's Avatar
EliteHardcoreCannuckSquad
Tenured Member 10 Years
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
Originally posted by QuagmireMan
high boost run on low octane where did you hear that?
Read it again... he said RX-7's like low octane "with the exception of high-boost turbos"
Reply
Old Oct 12, 2003 | 05:40 PM
  #6  
smnc's Avatar
EliteHardcoreCannuckSquad
Tenured Member 10 Years
 
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
My wife's 95 base model had that problem too. Turns out the carb was clogged and dirty as hell....
Reply




All times are GMT -5. The time now is 12:42 AM.