glass channels??
06-08-02, 03:32 PM
#2
Nope I never did when I changed mine, I just pulled the old ones out, pressed the new ones in and push and pulled the seal downward
Even tho I removed the door panel tho, and had the glass rolled down 1/2 way... Also some silicone in the top corners and about every 6 inches works great and keeps the seal from slipping downward when you roll the window up and down
Even tho I removed the door panel tho, and had the glass rolled down 1/2 way... Also some silicone in the top corners and about every 6 inches works great and keeps the seal from slipping downward when you roll the window up and down
06-09-02, 05:51 PM
#3
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Vermont
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Well found out its easier just to pull the window out. What the hell 2 screws and there you go. Once everything was done and adjusted works great took care of the play front to rear and the damn doors don't rattle anymore. Driveshaft Monday!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post