Fuel problem fixed, but did i break and apex seal?
#1
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Australia
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Fuel problem fixed, but did i break and apex seal?
Well some of you guys probably have read my other posts about my top end spluttering. I replaced the fuel filter today and it seemed to fix the problem. Revs out to 8000rpm (and further I'm sure but not game) without any splutter. Anywayz I was on my way from testing when I felt a slight jerk in power and realized my fuel gauage was on red. Then on the way to the fuel station I heard like a pop noise, soughta like a normal cars back fire but only very quite. Not a big *bang*. Anywayz I just made it to the servo. 50 litres filled her up, so I'm guessing there was five in there? I think its a 55 litre tank. Have to check. Anywayz I thought o **** hope that wasnt an apex seal. So leaving the station I let her warm up and hit it in 2nd to see if there was any difference in power. It still went fine so I'm guessing I was just out of petrol. Anywayz if I did break something would it still have went normal?
Paranoid Chris.
Paranoid Chris.
#2
Rotary Powered Boobies
iTrader: (1)
Join Date: Oct 2001
Location: Miami Beach
Posts: 2,530
Likes: 0
Received 0 Likes
on
0 Posts
Anywayz if I did break something would it still have went normal?
The best way to find out is to have a compression test done.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM