Fuel Cutout switch 85 gsl-se
03-20-11, 04:15 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2001
Location: Atlanta.Georgia
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Cutout switch 85 gsl-se
I have searched and i know how to install it. the problem is. i do not have a manual. and my fuse box inside by my feet is missing the box. can anyone post a picture of their box in their gsl-se. or maybe let me know what row and number that would help alot.
03-20-11, 05:12 PM
#2
Fuse that protects the fuel pump on a GSLSE is 20 amp. Sitting in the driver's seat, right side of fuse box second from the rear. That fuse is the "Engine" fuse. It also protects the main relays and pollution control solenoids. If you pull that fuse the engine will stop immediately. You really should wire your fuel pump switch to break the ground (Black wire) that is in the plug for the pump under the left side storage box. This way the engine will stop because it runs out of fuel not because the power is cut to the main relays.
You can download FSMs and wiring diagrams at either of these sites.
http://foxed.ca/foxed/index.php?page=rx7manual
http://wright-here.net/cars/rx7/manuals.html
You can download FSMs and wiring diagrams at either of these sites.
http://foxed.ca/foxed/index.php?page=rx7manual
http://wright-here.net/cars/rx7/manuals.html
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
