front rotor leaning out
#1
Senior Member
Thread Starter
Join Date: Mar 2005
Location: Amarillo, Texas
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
front rotor leaning out
My front rotor's primary plug is white and the rear is black w/ a bit of brown. The trailings are brown and brown w/ a bit of black, front to rear. I cleaned out the 4 jets in the bowls and the 4 jets that are on top that lead to the throats. I've also replaced teh gaskets and float needles/seats. Is it time now to start messing w/ the floats? I know everyone says dont mess w/ the floats, but I cant think of anything else to even the two rotors out...
#2
Lives on the Forum
Sounds like your jets are still clogged. Maybe the screens in the banjo bolts? Also, recheck the ignition wire routing to make sure an error wasn't made...
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM