front axle questions....
#1
9000 rpm's of sexy
Thread Starter
Join Date: Dec 2007
Location: Nda woods far far away
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
front axle questions....
i have found a way to change the lug pattern on my back axle... but what about the front i want to be able to bolt a set of third gen rims on my first gen. I found replacement splines from respeed for the rear but nothing for the front. i have searched and searched and still not found anything that would help me any help is greatly appreciated thanx in advance...
Shu
Shu
#2
Banned. I got OWNED!!!
iTrader: (3)
This is what you need to convert to 5 lug up front. Although the 3rd gen wheels have the wrong offset and you would need a 1.5" or 2" spacer.
http://www.mrcmfg.com/respeed/catalo...7e562aafccd193
There are many reasons to upgrade other than the wheels so maybe you could find better suited wheels.
Running wheels with the incorrect offset by that much changes the scrub radius quite a bit. Scrub radius is a important part of the way the car "feels". Also the axles may not give you the proper offset numbers to run the 3rd gen wheels.
-billy
http://www.mrcmfg.com/respeed/catalo...7e562aafccd193
There are many reasons to upgrade other than the wheels so maybe you could find better suited wheels.
Running wheels with the incorrect offset by that much changes the scrub radius quite a bit. Scrub radius is a important part of the way the car "feels". Also the axles may not give you the proper offset numbers to run the 3rd gen wheels.
-billy
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM