Finally fixed my bad vacuum leak!
11-15-11, 12:21 PM
#1
Team SR
Thread Starter
Finally fixed my bad vacuum leak!
Just as a good example of the difference it can make...
Skip to the middle/end to hear the god awful idle... It also had a lot of trouble starting. (Video taken sunday)
http://youtu.be/Z-kO0WV2QMM
After I found the ridiculous leak in the manifold... It's now idling at a perfect 1k rpm since this last video
http://youtu.be/PMCrWi1vnzM
Skip to the middle/end to hear the god awful idle... It also had a lot of trouble starting. (Video taken sunday)
http://youtu.be/Z-kO0WV2QMM
After I found the ridiculous leak in the manifold... It's now idling at a perfect 1k rpm since this last video
http://youtu.be/PMCrWi1vnzM
11-16-11, 08:13 AM
#5
Full Member
Join Date: Jun 2011
Location: New York
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Thats great!
How did you find the leak? like what did you go about doing? And was it the gasket? I am dealing with very lean idle and stalling but will rev great. The car was idleing like a champ not to long ago. Idk if i should rebuild the carb i just cant find any vacuum leaks.
How did you find the leak? like what did you go about doing? And was it the gasket? I am dealing with very lean idle and stalling but will rev great. The car was idleing like a champ not to long ago. Idk if i should rebuild the carb i just cant find any vacuum leaks.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
