I'll have to contact billy about that and get back to you.
|
Thanks Sam, for your quick response and no hassle or questioning to a part that was missed in my original shipment ordered through Billy.
Have put my rx3 coilovers on since and the car is looking great. https://www.rx7club.com/old-school-other-rotary-63/whore-my-rx3-around-while-i-can-891117/. Thanks |
how are you making out with the SA tank? I am getting closer to going home and money burning my pocket :) Do you think it will be ready by the end of june when I get home? I really do not want to weld in a sump on the stock one at this time so I figured I would add some pressure ;)
|
damn it! My rear purches are rusted to all hell... I want these ones!
|
New parts
I would def buy a gas tank for my 85
|
Originally Posted by Hyper4mance2k
(Post 10588762)
damn it! My rear purches are rusted to all hell... I want these ones!
|
Hello,
Will a Nikki Air Cleaner/Box be in the works? I'd be very interested. I have a couple ideas. -Crispin |
Originally Posted by Crispin38
(Post 10590501)
Hello,
Will a Nikki Air Cleaner/Box be in the works? I'd be very interested. I have a couple ideas. -Crispin |
Originally Posted by dj55b
(Post 10590516)
There are a couple ideas for this being tossed around. Nothing finalized yet though.
Check out the Cold/Airbox for this Turbo REPU. This could be used for any first gen. Turbo/NA wouldn't matter. Should be relatively easy to make for you guys. (I'd probably do a different way of locking the top on, though) https://www.rx7club.com/picture.php?...ictureid=14359 https://www.rx7club.com/picture.php?...ictureid=14353 https://www.rx7club.com/picture.php?...ictureid=14355 |
I like that air box. My only thoughts:
1) Needs to be easier to get the top off. It would take 1/2 hr. to get to the filter. 2) Looks like they made it pretty heavy. Would be nice to decrease the thickness of the box and lose some of the unneccesary weight. |
I agree with both points. But I love the placement/design of it.
The intake pipe "Hole" could be placed anywhere for different systems. I think it's pretty thick/solid because it's the intake on a turbo, it's properly sealed, so it can create quite a bit of vacuum. The thicker, the less chance for flex. Although - it probably could be thinner than that one. |
I would really like an air cleaner that would fit on top of the Nikki carb and allow us to run a piece of round 3" or 4" hose up to the front of the radiator. Basically, an air cleaner that would be able to be combined with this:
http://mrcmfg.com/catalog/images/fbcoldair.jpg To make a cold air system. |
I would just like to request to see PDF's for installing instructions to be available without signing up for the forum. I wanted to look into a part from there and see how difficult installation would be, but had to sign up. I know it's not too hard to sign up for a forum but I guess I'm just a whiny little girl :(
|
Originally Posted by EvilWankel
(Post 10591850)
I would just like to request to see PDF's for installing instructions to be available without signing up for the forum. I wanted to look into a part from there and see how difficult installation would be, but had to sign up. I know it's not too hard to sign up for a forum but I guess I'm just a whiny little girl :(
|
Another possible customer on the SA gas tank, I think mine is starting to leak at the seam and possibly at the sending unit
|
I'd definitely be interested in the FB tank too, especially if they're for sale by June.
(The oil filler tube too.) What would you do for pickup and return lines, size wise? Have you considered selling a modified pickup/return assembly on its own for all the blow-thru project people? |
Originally Posted by crispin38
(Post 10590501)
hello,
will a nikki air cleaner/box be in the works? I'd be very interested. I have a couple ideas. -crispin
Originally Posted by glazedham42
(Post 10591707)
i would really like an air cleaner that would fit on top of the nikki carb and allow us to run a piece of round 3" or 4" hose up to the front of the radiator. Basically, an air cleaner that would be able to be combined with this:
http://mrcmfg.com/catalog/images/fbcoldair.jpg to make a cold air system. |
Originally Posted by Glazedham42
(Post 10591707)
I would really like an air cleaner that would fit on top of the Nikki carb and allow us to run a piece of round 3" or 4" hose up to the front of the radiator. Basically, an air cleaner that would be able to be combined with this:
http://mrcmfg.com/catalog/images/fbcoldair.jpg To make a cold air system. |
Originally Posted by inuissus_cendi
(Post 10593481)
I'd definitely be interested in the FB tank too, especially if they're for sale by June.
(The oil filler tube too.) What would you do for pickup and return lines, size wise? Have you considered selling a modified pickup/return assembly on its own for all the blow-thru project people? |
Originally Posted by j9fd3s
(Post 10594382)
you can put a 3" hose on the stock air cleaner, so um you do.
|
Originally Posted by JoeNoble
(Post 10594517)
Yeah that's cool if you still have a rats nest but for those of us with no emissions it would be nice to have somethin else.
|
Originally Posted by JoeNoble
(Post 10594517)
Yeah that's cool if you still have a rats nest but for those of us with no emissions it would be nice to have somethin else.
|
Originally Posted by Crispin38
(Post 10594533)
Regardless of emissions though I'm not a big fan or the forced air air box, not when you're autocrossing at speeds under 45 MPH. We need something with a larger round filter, like a 14x3 or even 14x4. That's open. Personally I think the SDJ/Mazdaspeed comp air cleaner assembly is ideal, except, it still uses the small stock filter.
|
Wait, does this mean us Canadian guys no longer have to go third party through RPM?
Saweeet. Also, I would advise against setting up a UPS account for the US guys, the prices will go through the roof after it clears customs (we pay~30-45% brokerage/customs fee when when shipping with UPS to import stuff into Canada). USPS is usually 3% brokerage. Just my .02 for those thinking the shipping is slow. |
Originally Posted by djessence
(Post 10595890)
Wait, does this mean us Canadian guys no longer have to go third party through RPM?
Saweeet. Also, I would advise against setting up a UPS account for the US guys, the prices will go through the roof after it clears customs (we pay~30-45% brokerage/customs fee when when shipping with UPS to import stuff into Canada). USPS is usually 3% brokerage. Just my .02 for those thinking the shipping is slow. As for UPS, we learned a couple of tricks about all shipping options. Apparently, if you ship things out expedited, there are no custom charges for either coming in or going out of Canada. Taxes still apply though for items over 200$ |
All times are GMT -5. The time now is 03:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands