I'm probably going to be the first to buy the SA tank once you get it done as I said a few times. As long as it can handle FI on a huge motor and has a sump for external fuel pumps, I will be on it like crazy.

Hi Ken,

I that is a bit odd, the service I ship through is suppose to take 4 business days, i checked a few tracking number and everything else has seemed to take about that. It doesn't help that I sent it out on a Saturday night and they wouldn't of processed it till Monday sometime.

We're sorry about that, I'll try to maybe set up a UPS account for you US guys if it makes it any better.

Sam

The first tank is most likely sold to ourxseven as he's the one that supplied me with a SA tank.

No problem Sam.... I know it's no reflection on you guys. Just wanted to provide some feedback. I guess now I know how it feels to be Canadian and ordering parts. :nod:

You guys still have it easy .. you still don't have to deal with all our brokerage and duty and extra taxes on the packages!

I just received some bad new about Tokico Shocks, everything has gone up almost 20$ per part :S ... I can take the hit on a few things would be just a slight increase, but the HP shocks are more for me to buy them now then I have listed on the website!!!

They're saying that may be because of all the craze thats going on out there, everything else is still at normal price though.

So I apologize in advance for those going up in price shortly. This will be seen on everyone's website selling these shocks and not just ours just so you guys know.

edited. i read the site and it said my shockes were delivered. my bad

Did you buy ReSpeed from Billy Sam?

New parts are looking good. I *may* have a decent condition FB tank sitting around that you could use to have scanned. I'll have to look around my grandpa's barn next time I'm out that way.

Yes I did, you must of missed the thread about that.

I already have an FB tank. I just finished scanning the SA a few min ago actually.

Will you be putting a threaded port in them for a water temp sensor? a 3/8 NPT would work well. I used an old school aluminum one that had the flat spot on top to drill and tap for a sensor. Sure would be nice to have an after market one when needed.

Sam,

I love your enthusiasm with the new venture. It's nice to see someone who is very particular about their work taking over for Billy. Respeed has always put out fantastic products, and it's nice for once to see a company change hands without detriment to its products or customers.

Do you still offer the intake manifold heat shield for the stock 12A manifold? It is the heat shield that has the little dip in the middle to fit under the ACV port? I found the flat version on the website, but I can't find the offset version for the stock manifold. I was going to order one for my 1985 GS.

Thanks,
Jamie

I can certainly make 2 versions of it, one with and one without that bung.

Any changes to the old school line up?

Not at the moment, I need to get my hands on them first.

thanks good to know

I just ordered springs

Just as in yesterday? I don't show anything for that.

On another note, a little teaser that we are working on these gas tanks, doesn't look like much but give us some time and it will :)

https://www.rx7club.com/attachment.p...1&d=1302112182

Last week....:scratch:

Got a confirmation email saying it's being processed but nothing saying it's shipped.

Oh okay, you're fine then. I'm guess its Gary, rear coil over with 125# spring rates correct?

I just thought you meant that you had just put in the order and it didn't go through.

yep, that's me :gwink:

I am keeping a hawk eye on him :lol:

Sam was the perfect choice. He has already improved the product line and I am sure will for years to come.

-billy

oil filler
 

I was just wanting to remove my oil filler neck and clean it, Couldn't tell how it came out so I didn't mess with it.
Does it just pull out?

gently tap it side to side with a soft mallet, it is press fitted in. do not tap on it with the oil cap on, it will break and plastic pieces will fall in your engine. (ask me how i know) haha

Sam,


Do you still offer the heat shield for stock intake manifolds? The one that has the dip in the middle? I want to order one, but can't find it on the website. I helped Billy develop it a couple of years ago. See picture.

https://img149.imageshack.us/img149/...ict0298iv8.jpg