1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

fender

Thread Tools
 
Search this Thread
 
Old Apr 6, 2006 | 06:14 PM
  #1  
jamless's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 69
Likes: 0
From: cinn ohio
fender

how hard is ti get a driver side fender off?
Reply
Old Apr 6, 2006 | 07:36 PM
  #2  
fatmanslim247's Avatar
Runnin slow for now
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 99
Likes: 0
From: wichita kansas
easy
Reply
Old Apr 6, 2006 | 07:57 PM
  #3  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
Not bad, hardest nut is the one that sits under headlight housing and the 2 at the bottom that bolt into the rocker usually snap off. There is one hidden under the top of the door and another on in the middle of the fender, back side, inside the wheel well. Another one is on the filler panel that goes between the headlghts. The ones that hold the strut stau at the bottom of the fender usually teist off too.
Reply
Old Apr 6, 2006 | 09:58 PM
  #4  
Lee Lyons's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 1,288
Likes: 0
From: Calgary; AB
all of about 30 seconds with air tools...
Reply




All times are GMT -5. The time now is 04:30 PM.