FB is now gutted / PICS
04-18-06, 11:40 PM
#1
Its an addiction.
Thread Starter
Join Date: May 2002
Location: Central Florida
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
FB is now gutted / PICS
heres pics of my rex, gutting it and having new interior from victoria british that im going to put in. Then im off to get it repainted same color - then im going for a rebuild on my 12a, and i allready have the GSL-SE rear end i found locally not installed yet, not sure about transmission - 48mm webber dcoe sidedraft allready on tuned nice now - rb headers- 3"inch straight installed- i want to super charge it. Not sure where to go that route.
04-18-06, 11:51 PM
#3
I suggest buying carpet from another source than VB. I bought a set for my Z, took it back it was such cheap quality and had to be sewn. The front part came in 5 pieces and was not a one pice, pre-formed unit.
I ordered a pre-formed one from my local auto upholstry shop, along with an extra matching 2 yards of roll carpet for the back and lower door panels.
There are several online suppliers, that sell preformed units, along with matching roll stock if you want it.
I ordered a pre-formed one from my local auto upholstry shop, along with an extra matching 2 yards of roll carpet for the back and lower door panels.
There are several online suppliers, that sell preformed units, along with matching roll stock if you want it.
04-19-06, 12:04 AM
#4
Its an addiction.
Thread Starter
Join Date: May 2002
Location: Central Florida
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by trochoid
I suggest buying carpet from another source than VB. I bought a set for my Z, took it back it was such cheap quality and had to be sewn. The front part came in 5 pieces and was not a one pice, pre-formed unit.
I ordered a pre-formed one from my local auto upholstry shop, along with an extra matching 2 yards of roll carpet for the back and lower door panels.
There are several online suppliers, that sell preformed units, along with matching roll stock if you want it.
I ordered a pre-formed one from my local auto upholstry shop, along with an extra matching 2 yards of roll carpet for the back and lower door panels.
There are several online suppliers, that sell preformed units, along with matching roll stock if you want it.
good looking out on that
ill do a differnt approach
04-19-06, 12:18 AM
#5
rotarless
Join Date: Sep 2005
Location: N/A
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
04-19-06, 12:53 AM
#7
I have a brown on brown 85 that I bought carpet for nearly 3 years age from 1AAuto.com. I have yet to install it but the quality looks good. They didn't have the specific colors for the 1st gens, so I picked out 3 that looked close from thier color charts and e-mailed them. They sent me a small sample of each in the mail before I made my purchase.
Trending Topics
04-19-06, 08:46 AM
#9
On the prowl for an FB
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by twigg
heres pics of my rex, gutting it and having new interior from victoria british that im going to put in. Then im off to get it repainted same color - then im going for a rebuild on my 12a, and i allready have the GSL-SE rear end i found locally not installed yet, not sure about transmission - 48mm webber dcoe sidedraft allready on tuned nice now - rb headers- 3"inch straight installed- i want to super charge it. Not sure where to go that route.
04-19-06, 02:49 PM
#10
Originally Posted by d0ntdreamit
the upper interior roof liner is sagging at the rear window and the fron window, any suggestions?
I don't think adhesive will secure the fiberous backing.
I don't think adhesive will secure the fiberous backing.
