FB flip up headlight issue
#1
82 FB
Thread Starter
FB flip up headlight issue
Hey guys!
I'm in the process of restoring/building an 83 Rx-7. I'm running into an issue with the flip us. I have the cover, all the hardware/frameware. But! I don't have the screws, bolts, or whatever the headlights pivot on. The brackets that are on the core/radiator support area, where the headlights attach to.
My question being, are they specific type harware pecies? Or can I get away with a bolt, nut, and lockwasher?
Thanks!
I'm in the process of restoring/building an 83 Rx-7. I'm running into an issue with the flip us. I have the cover, all the hardware/frameware. But! I don't have the screws, bolts, or whatever the headlights pivot on. The brackets that are on the core/radiator support area, where the headlights attach to.
My question being, are they specific type harware pecies? Or can I get away with a bolt, nut, and lockwasher?
Thanks!
#2
RX HVN
iTrader: (2)
Tho I am a bit vague on your description. If you have the _complete_ light/frame assembly then this ALL attaches to the chassis AFAIK. So if you are just bolting this to the car, then any correct-pitched metric hardware should be fine.
I have posted an image from the parts book. If I haven't answered your question, maybe this will help refine what you are asking?
Stu Aull
80GS
Alaska
I have posted an image from the parts book. If I haven't answered your question, maybe this will help refine what you are asking?
Stu Aull
80GS
Alaska
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM