1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Electrical woes

Thread Tools
 
Search this Thread
 
Old 07-28-04, 04:40 PM
  #1  
Blew my 3rd one 12/8/08

Thread Starter
iTrader: (2)
 
Unsupa's Avatar
 
Join Date: Jun 2003
Location: Inman SC
Posts: 821
Likes: 0
Received 0 Likes on 0 Posts
Electrical woes

My interior lights and clock don't work.. they did at one time but now everytime i put in a fuse it pops instantly.. so i'm thinking a short.. pulled out my continuity tester and gave it a shot at the interior lights first, seeing how when they didn't work my clock still did.. well it shows continuity to ground on both wires... the blue/green wire is the one coming from the fuse box so i figured it shouldn't have continuity to ground, especially since there is no fuse in right now... am i right to think this or what? I'm outside messing with this now, so i'll post back. any help appreciated. thanks.
Old 07-28-04, 06:25 PM
  #2  

 
rx7passion's Avatar
 
Join Date: Feb 2001
Location: Phoenix, Az
Posts: 1,049
Likes: 0
Received 0 Likes on 0 Posts
try a voltage drop test, see what voltage you have at the beganing of the wire at the lbefore the light after the light and at the ground. that way you can isolate to see if you have a cross short and getting too much juice and poping your fuses
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WANKfactor
1st Generation Specific (1979-1985)
6
09-29-15 01:14 PM



Quick Reply: Electrical woes



All times are GMT -5. The time now is 01:03 PM.