ECI brake booster Multiplier?
#1
ECI brake booster Multiplier?
Now i'm just thinking here, for the guys now with the T2 brakes, would something like this:
http://ecihotrodbrakes.com/brake_pre...ultiplier.html
be benificial to have a stronger braking on the larger area of the brake? This each multiplier is actually custom made to your own setup needs. I'm still not exactly sure where about it hooks up (maybe inbetween the master and salve?). Anyhow let me know what you guys think about something like this.
Sam
http://ecihotrodbrakes.com/brake_pre...ultiplier.html
be benificial to have a stronger braking on the larger area of the brake? This each multiplier is actually custom made to your own setup needs. I'm still not exactly sure where about it hooks up (maybe inbetween the master and salve?). Anyhow let me know what you guys think about something like this.
Sam
#4
Rotoholic Moderookie
iTrader: (4)
No idea/opinion about that thing, but I thought I'd mention that I've seen someone on here post pics of a TII brake booster installed in their FB. IIRC it was an EXTREMELY tight fit, where they had to loosen the bolts on the clutch master to make enough wiggle room for both to fit... but if the TII booster and cyl are better than ours (and one would assume so since it powers four 4-piston clipers) then methinks it might be all the upgrade we need.
But I'd need to find the thread again.
Jon
But I'd need to find the thread again.
Jon
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM