1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Ebaying and shoping around

Thread Tools
 
Search this Thread
 
Old 04-07-04, 01:04 AM
  #1  
The thing

Thread Starter
 
capri93's Avatar
 
Join Date: Mar 2004
Location: palmerton pa
Posts: 388
Likes: 0
Received 1 Like on 1 Post
Ebaying and shoping around

Ok i found a 13b out of a gen 2 and so far the bid is at 30. Im thinkin about getting it as aproject rebuild. The guy say he think the apex seals went or was told thats what the problem was. The engine just crancked but didn't start. What is a none running engine worth? I figured i might go as high as 40-60 depending on the cost of the rebuild i would do the work my self with the help and knowlege of all the people on here.
Also found an 85 rx-7 for 250 also local less than 20min from my house going to look at it tomarrow i hope. this is his description of the car

'85 RX7 The engine is 12A, it ran last time I tried it last summer. Runs good. It has about 110,000 on it. 5 speed trans. The front struts are bad. Body
fair with some rust on lower panels and frame. faded red paint job. Interior is in very good shape. windshield has a crack on bottom edge and wipers not working (arm fell off, wiper motor OK). I thought 85's had 13b's in them.
Old 04-07-04, 01:30 AM
  #2  
Senior Member

 
Lotus00's Avatar
 
Join Date: Jun 2002
Location: Minnesota
Posts: 558
Likes: 0
Received 0 Likes on 0 Posts
If the engine on Ebay did in fact lose an apex seal then it is not worth very much. You would need new at least on new rotor housing for sure, and those things are pretty expensive. When I lost an apex seal in my old engine it costed me ~$800 to rebuild (I got 2 used housings and rotors). I was in a hurry though, I didnt really shop around for a deal on the parts, just got whatever came up first.

The only first gens to come with a 13b are the GSL-SE. I would buy that car if the rust isnt too bad, 110,000 miles isnt really all that many and it would make a good project car.
Old 04-07-04, 01:49 AM
  #3  
THE ONE. THE ONLY!

iTrader: (2)
 
kettlman's Avatar
 
Join Date: Jul 2003
Location: wa
Posts: 3,776
Likes: 0
Received 2 Likes on 2 Posts
just one word for you.............SHIPPING.
gotta think about how much shipping will be on the engine. i don't know for sure but its gotta be more than $150.
Old 04-07-04, 03:57 AM
  #4  
SKELETOR!

 
Cody's Avatar
 
Join Date: Mar 2003
Location: Prescott Valley, AZ
Posts: 1,077
Likes: 0
Received 0 Likes on 0 Posts
You will be outbid anyways.

Engines seem to go for $500+ from what I have seen on Ebay, even in poor condition.
Old 04-07-04, 10:54 AM
  #5  
Senior Member

 
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes on 0 Posts
if it blew an apex...you can be sure the shrapnel blew through the turbo...gotta replace that too...
Old 04-07-04, 07:16 PM
  #6  
The thing

Thread Starter
 
capri93's Avatar
 
Join Date: Mar 2004
Location: palmerton pa
Posts: 388
Likes: 0
Received 1 Like on 1 Post
Ok the engine is within 70miles of my home so no im not going to ship it that would be stupid, it would only tak like $20 in gas to go and fetch it.
The add said nothing about turbo and it didn't look like it had a turbo but I don't know if he took it off. The bid is till under $30 so im going to call the guy and see what he's expecting to get and offer cash.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Coochas
1st Generation Specific (1979-1985)
44
11-05-19 11:08 PM
chiefmg
1st Generation Specific (1979-1985)
2
09-10-15 07:46 AM



Quick Reply: Ebaying and shoping around



All times are GMT -5. The time now is 05:02 PM.