ok, i just put in a 16" imperial electric fan, as suggested by rx7carl, so i was kinda wondering if you could help. I got the thing all mounted, but now i dont know how or where to wire it, and if i need a temperature switch. If i need a temperature switch, what kind is it, and where could i get one???

 

will you need a temp switch? Well, that depends on you and the car. You don't HAVE to have one, but it would be easier as far as you won't have to worry about it getting too hot without you noticing and realizing "oops, I forgot to turn the fan on"

As far as how to wire it, it depends on which way you go -- with a thermostat or just a switch. Either way, I'm curious to know myself 'cause I'm about to undertake that whole deal myself. <g> At least you have a little more information to go by though.

 

TryTHIS

 

Can you say <CTRL-D> on that page? Sure! I knew you could! "Favorites" are our friends!

 

thanks a TON for that link rotaryryan! oh, and jweather73, if you are puttin in the same fan as me, and find a good way to mount it (other than zip ties...) plz let me in on your secret!!!

 

I used the black ties that came with the fan. Held up nicely so far.

 

go to a home depot store place and get those L shaped metal things, 2 inches on each side. get 2 of them then mark adn drill holes then u can use screws to screw into you fan mounts