door questions
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
door questions
ok...I have used search and I need some help please.
I have a 1980 RX7 and need new doors. I know of the differences between the series I and series II with regards to the suspension, front end, brakes, and rear tails but what about doors? I NEED two new doors for my RX7 in a bad way. Are the shells the same from the Series I and Series II. I know the mirrors and interior door panel will be different but what about the shell? Will it bolt up and the crease be the same?
I have a 1980 RX7 and need new doors. I know of the differences between the series I and series II with regards to the suspension, front end, brakes, and rear tails but what about doors? I NEED two new doors for my RX7 in a bad way. Are the shells the same from the Series I and Series II. I know the mirrors and interior door panel will be different but what about the shell? Will it bolt up and the crease be the same?
#6
Beware Of Squirrely Wrath
Join Date: May 2002
Location: SW Washington
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
If you can't find anything closer than me in WA, I've got a passenger door in pretty good shape (only problem is the window frame has surface rust) and a driver side door that could use a little work on the front edge.
Let me know,
Brian
Let me know,
Brian
Trending Topics
#9
This IS a tasty burger!
Join Date: Aug 2003
Location: Nashville, TN
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
If you bring your X7 to Nashville, I sure hope to spot it! I've been here over 2 months and haven't seen a single 1st gen (besides mine, that is).
hey RRTEC what other parts do you have? I could use some minor things (storage bin hinges, conecting pins for the sealing... heck, even rearview mirrors, mine are a bit rusted)
hey RRTEC what other parts do you have? I could use some minor things (storage bin hinges, conecting pins for the sealing... heck, even rearview mirrors, mine are a bit rusted)
#10
Senior Member
Thread Starter
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
I wish I were driving it but I will be in my Maxima today. Sending the girlfriend's daughter to the airport to go see her dad.
I won't be using the power mirrors on either of my donor doors.
Boy, Mazda sure did skimp on the storage bin, console and glove box hinges didn't they?
I won't be using the power mirrors on either of my donor doors.
Boy, Mazda sure did skimp on the storage bin, console and glove box hinges didn't they?
#12
Senior Member
Thread Starter
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
You need passenger and driver's side power mirrors? How hard are they to remove?
I need the doors but I don't need the mirrors because I am using my 1980 mirrors.
I don't know how much this stuff is worth. Make a reasonable offer and I will probably take it. They are rust free. I can provide you with pics this weekend.
I need the doors but I don't need the mirrors because I am using my 1980 mirrors.
I don't know how much this stuff is worth. Make a reasonable offer and I will probably take it. They are rust free. I can provide you with pics this weekend.