Detatch Steering box from column. Possible?
#1
Right near Malloy
Thread Starter
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 510 Likes
on
345 Posts
Detatch Steering box from column. Possible?
IIRC, they're one piece, but I could be wrong... This is in relation to the rack and pinion thread, but different enough that I thought it needed it's own thread.
Can you remove the box and steering column seperately?
Can you remove the box and steering column seperately?
#3
Junior Member
Join Date: Feb 2002
Location: houghton, michigan
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
so how do you get the steering column out of the car, reason im asking is mine wouldnt come up, i was assuming where the bigger shaft goes over the smaller under the dash it should slide out from there, didnt spend too much time trying to figure it out, just worked around it, well how do you actually take it out, it would be helpful
#4
Driven a turbo FB lately?
iTrader: (1)
you remove the collar off the steering column and pull it outwards, it wasnt too bad but I had the motor out when I did it, Id say it have to be a real BITCH with the motor in
@Pele It does come apart into 3 pieces, the actual column and worm gear, the sector shaft and the body of the steering box, there again its a real bitch, ask me how I know...
@Pele It does come apart into 3 pieces, the actual column and worm gear, the sector shaft and the body of the steering box, there again its a real bitch, ask me how I know...
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM