Cupholders? We have cupholders!!!
04-04-02, 04:55 PM
#27
smog nazi destroyer
that is awsome for you second series guys.. but us poor old SA's and third series have a different center consol setup. so i donot know if it would work for us..
can you send up a couple pics??
can you send up a couple pics??
04-04-02, 05:46 PM
#28
Originally posted by riffraff
fdracer: the only problem that i see with those cupholders is that they donot hold anything larger than a soda can (now i say soda because you all know that you are not supposed to be driving with beer.. plus beer in cans sucks ***). do you have problems fiting drinks in there?
fdracer: the only problem that i see with those cupholders is that they donot hold anything larger than a soda can (now i say soda because you all know that you are not supposed to be driving with beer.. plus beer in cans sucks ***). do you have problems fiting drinks in there?
04-04-02, 06:04 PM
#29
smog nazi destroyer
donot worry mike. i was not refering to anyone in particular.
besides, cup holders make a great place to keep the boos while you are working on your car.. if you put your drink to close to your tools, you are liable to nock it over while going for a 3/8 drive. and that would be alcohol abuse, which we all know is bad....
besides, cup holders make a great place to keep the boos while you are working on your car.. if you put your drink to close to your tools, you are liable to nock it over while going for a 3/8 drive. and that would be alcohol abuse, which we all know is bad....
04-04-02, 10:56 PM
#30
U sUx0rz @ THe IntaRwEB!
Join Date: Feb 2001
Location: Claysburg, PA, USA
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Something I used to do in my old '82 GSL... 'course, it only works if you're on a freeway, or a road with almost no turns... works really well for large and supersize drinks from McDonalds.. if you set the drink just right and balance it, it'll rest on the bottom of the steering wheel and lean against the horn button.. voila, instant cupholder and very accessible, too... LOL Ahhh.. I remember eating, smoking and driving a stick all at the same time while in traffic... damn, I hate auto trannies... LOL
--Danny
--Danny
04-04-02, 11:26 PM
#31
04-05-02, 01:29 AM
#32
sold the FD...kept the FB
Originally posted by riffraff
fdracer: the only problem that i see with those cupholders is that they donot hold anything larger than a soda can (now i say soda because you all know that you are not supposed to be driving with beer.. plus beer in cans sucks ***). do you have problems fiting drinks in there?
fdracer: the only problem that i see with those cupholders is that they donot hold anything larger than a soda can (now i say soda because you all know that you are not supposed to be driving with beer.. plus beer in cans sucks ***). do you have problems fiting drinks in there?
p.s. MyRxBad,
yeah I was thinking of also adding some glue and a support bracket to go with the six screws, what do you think?
Naw man,...there was already six counter-sunk holes on the mount, definitly over kill.
04-07-02, 07:28 PM
#35
The AUTO DOCTOR
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
ok heres a link to my album with a few pics of my car and a few of the center cup holder enjoy.
David
http://www.imagestation.com/album/?id=4292371483
David
http://www.imagestation.com/album/?id=4292371483
04-07-02, 07:33 PM
#36
#!/sup_mod/üb3rg33k
Join Date: Sep 2001
Location: Kansas City
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by riffraff
donot worry mike. i was not refering to anyone in particular.
besides, cup holders make a great place to keep the boos while you are working on your car.. if you put your drink to close to your tools, you are liable to nock it over while going for a 3/8 drive. and that would be alcohol abuse, which we all know is bad....
donot worry mike. i was not refering to anyone in particular.
besides, cup holders make a great place to keep the boos while you are working on your car.. if you put your drink to close to your tools, you are liable to nock it over while going for a 3/8 drive. and that would be alcohol abuse, which we all know is bad....
04-07-02, 10:36 PM
#38
Full Member
Join Date: Dec 2001
Location: Greenville, OH
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rx-7girl
nuggets are nasty......and my friend had one in her old mazda 626 and she only seemed to use it whenever she was picking me up for really important.....
nuggets are nasty......and my friend had one in her old mazda 626 and she only seemed to use it whenever she was picking me up for really important.....
What are you leaving out there Rx-7girl ummmm.
04-08-02, 01:31 AM
#39
The AUTO DOCTOR
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
i want to say its the early 1 with the same lights as the fb. go to the dealer and get it its like 12-15$ and is 3 peices the holder, a LARGE cup adapter(great for holding change) and a little spill pan
04-08-02, 01:34 AM
#40
smog nazi destroyer
cool cool... next time i get a chance to head down to the local mazda dealership i will pick one up. i hope they would be reliable enough to get the right part from them, because well all know how much mazda dealerships suck for everything else
04-08-02, 02:14 AM
#41
Full Member
Join Date: Mar 2002
Location: WV
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
I might be mistaken, but that looks pretty much the same as the sa's ashtray. i think they might work However, i'll give someone else the pleasure of finding out 
I'm going to be putting my power window and mirror switches in that location, nicely hidden my the ashtray cover, i think.
BTW, has anyone taken apart the sa ashtrays and wondered why there was that small rectangular translucent green peice, with a crosshatch pattern on top? There's no light underneath it in my car, at least. (i'll put an LED in there for kicks tho...eventually have a blinking light to show an armed security system, like the others guys have )....
However, i'll give someone else the pleasure of finding out I'm going to be putting my power window and mirror switches in that location, nicely hidden my the ashtray cover, i think. BTW, has anyone taken apart the sa ashtrays and wondered why there was that small rectangular translucent green peice, with a crosshatch pattern on top? There's no light underneath it in my car, at least. (i'll put an LED in there for kicks tho...eventually have a blinking light to show an armed security system, like the others guys have
)....
04-08-02, 08:15 PM
#44
smog nazi destroyer
ben97: the light that you are talking about in the sa ashtrays, it lights up in my car.. well atleast it did when it was in my 80..
i think that the size of the ash trays are the same in series one and two.. when ever i get a chance, i am going to swing over to mazda and pick up one of those miata cupholders, like badass was talking about... i will let you know how it works
i think that the size of the ash trays are the same in series one and two.. when ever i get a chance, i am going to swing over to mazda and pick up one of those miata cupholders, like badass was talking about... i will let you know how it works
08-13-02, 12:39 AM
#46
LOL...I feel you all on the lack of cupholders!! I LMAO when I saw those dinky little glove box things, too.
I typically shove whatever I'm drinking in between my seat and the door at kind of an angle. That works pretty well...Especially when whatever it is has a cap or lid on it...The only problem is if it's like a cardboard fast food cup...The cup bows from the pressure popping the lid off a bit...I usually don't know it, but figure it out REAL quick whenever I take a turn. Good thing I shampoo my carpets...
I typically shove whatever I'm drinking in between my seat and the door at kind of an angle. That works pretty well...Especially when whatever it is has a cap or lid on it...The only problem is if it's like a cardboard fast food cup...The cup bows from the pressure popping the lid off a bit...I usually don't know it, but figure it out REAL quick whenever I take a turn. Good thing I shampoo my carpets...
. Oh, and BadAss, what was the price on it?
08-13-02, 09:53 AM
#48
Rotary Freak
iTrader: (1)
Join Date: Feb 2002
Location: NJ
Posts: 2,693
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BadAssRX-7
ok UPDATE...... I went to the local dealer ad happen to see the miata cup holder so i got the part # off it just 4 u guys.
0000-88-HLDR-M5
ok UPDATE...... I went to the local dealer ad happen to see the miata cup holder so i got the part # off it just 4 u guys.
0000-88-HLDR-M5
Last edited by 85RX7GS; 08-13-02 at 10:07 AM.
