Coolant temp wire
Thread Starter
Joined: Oct 2005
Posts: 3,443
Likes: 2
From: Hagerstown, MD
Coolant temp wire
Can anyone tell me or have a picture of exactly which wire in the harness goes to the coolant temp senser under the filter? It's an 83 harness with a 79 12A. I'd like to find out as running the car without some sort of temo guage kinda makes me nervous
aint a rotor aint a motor
Joined: Aug 2004
Posts: 77
Likes: 5
From: nowhere
if you follow the main loom from driverside of firewall down to the chassis rail
theres a big black connector, its almost under the brake master......but near the rail!!
if you have a diagram its the X-01 connector, but the diagrams suck, so wouldnt bother!!!!
it has 2 rows of pins:
X X X - Y X X X X - X X X
X X X - X X X X X - X X X
on this connector the yellow wire with white stripe is the sensor you are after!!!!
its in the position of the Y above
theres a big black connector, its almost under the brake master......but near the rail!!
if you have a diagram its the X-01 connector, but the diagrams suck, so wouldnt bother!!!!
it has 2 rows of pins:
X X X - Y X X X X - X X X
X X X - X X X X X - X X X
on this connector the yellow wire with white stripe is the sensor you are after!!!!
its in the position of the Y above
Last edited by Yellow S2 Rx7 13BT; Nov 19, 2008 at 12:50 AM.
Thread Starter
Joined: Oct 2005
Posts: 3,443
Likes: 2
From: Hagerstown, MD
Yeah I think I may have found it but I have to move the harness to the other side of the filler neck to get it closer cause the wire is too short right now to get to the sensor
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM
