charging system
#1
Newbie
Thread Starter
Join Date: Oct 2003
Location: vesper
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
charging system
I recently installed a racing beat intake carburator and headers for my 80 rx7.I stripped all the emission controls off leaving a narly wiring harness laying on top off my engine, so I wacked it. I did leave the one wire in the harness for the alternator which should have 12v power when the ignition switch is on, but it doesnt. I checked all fuses and their good. As a result my alternator doesnt charge the battery. Not sure what to do??????
#2
Grey-Bruce Rotorhead
Join Date: Apr 2002
Location: Chesley, Ontario, Canada
Posts: 1,484
Received 0 Likes
on
0 Posts
Re: charging system
Originally posted by mrrabbit
I did leave the one wire in the harness for the alternator which should have 12v power when the ignition switch is on, but it doesnt.
I did leave the one wire in the harness for the alternator which should have 12v power when the ignition switch is on, but it doesnt.
Have you got a Haynes or a shop manual? If not, I'll try to send you a copy of the wiring diagram with colour codes.
#3
Newbie
Thread Starter
Join Date: Oct 2003
Location: vesper
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
charging failure
Yes the engine was running, and I do have a haynes manual. The manual includes wiring diagram for 79 with external regulator which is totally different. It also has diagram for models 81-85 but not for the charging system. If you have a diagram for 80 charging system I would love to have it, thanks
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
05-30-18 06:50 PM