Carburated fuel pump

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2004 | 04:55 PM

DrifterFC

Thread Starter

Full Member

Joined: Oct 2004

Posts: 65

Likes: 0

From: Gwinnett, Georgia

Carburated fuel pump

do yall think a 7psi 110 gph fuel pump is to much for a carbed rotary engine

Dec 29, 2004 | 07:45 PM

bcty

Boost This!

Joined: Nov 2001

Posts: 1,935

Likes: 0

From: Nanaimo, B.C, Canada

toally depends on the carb
maybe a bit more gph would better
i know holleys like 6psi
the stock nikkis RB says 3-4psi but ive seen them run better lower some ever are at 1-2psi

Dec 29, 2004 | 10:18 PM

RotaryEvolution

Sharp Claws

iTrader: (30)

Joined: Oct 2003

Posts: 5,107

Likes: 50

From: Central Florida

probably get more/better responses on the 1st gen board, we are more fuel injection knowledgable on this board.

Dec 30, 2004 | 12:00 AM

BlaCkPlaGUE

I live in an igloo

Joined: Jul 2004

Posts: 2,546

Likes: 0

From: calgary alberta

Quote:

Originally Posted by Karack

probably get more/better responses on the 1st gen board, we are more fuel injection knowledgable on this board.

true, if i had any carbed questions, i'd take it to the first gen boards. Funny how we all have our own little groups, it'd be like posting at a completley different forum if we started posting in there, heh..
If you go over to the RX8 boards its amazing as to 80% of the members there are just people who bought an 8. They have no mechanical experience, they are really good at filing lawsuits for bad service, and they have no practical troubleshooting experience!

Anyways...