1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

carb issue

Thread Tools
 
Search this Thread
 
Old Mar 3, 2008 | 09:02 PM
  #1  
84olschool's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 16
Likes: 0
From: virginia
VA carb issue

what up peeps need some info got an 84 bone stock gsl what is that thingy ma jigg under the carb that makes the humming noise when it goes bad? what it do,best way to fix,how hard, blah blah blah. thanks for any info.
Reply
Old Mar 3, 2008 | 09:57 PM
  #2  
djessence's Avatar
djessence
 
Joined: Aug 2007
Posts: 2,063
Likes: 0
From: Alberta, Canada
Shutter valve?
Reply
Old Mar 3, 2008 | 10:02 PM
  #3  
Vashner's Avatar
Rotary Enthusiast
 
Joined: Dec 2007
Posts: 1,079
Likes: 0
From: Texas
The valve it'self won't make that noise. When shutter goes back it starves the 2nd rotor of fuel air mix and causes a rough idle that sounds like ****. What's your symptoms?
Reply
Old Mar 4, 2008 | 06:12 AM
  #4  
84olschool's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 16
Likes: 0
From: virginia
u pretty much hit the nail on the head. rough idle and occasional hmmming noise. so is that what it is called shutter valve?
Reply
Old Mar 5, 2008 | 06:47 AM
  #5  
orion84gsl's Avatar
My 7 is my girlfriend.
Tenured Member 10 Years
iTrader: (5)
 
Joined: Feb 2006
Posts: 3,162
Likes: 1
From: London, Ontario, Canada
It will be on your intake manifold, on the right as facing from the front of the car, closer to the firewall. It's kind of mushroom shaped with a couple tubes coming off it. It may be stuck closed (read: bad). You'll have to get it open and wire it open or somehow find another way to keep it open.And yes, if we're all thinking along the same lines, that would be the shutter valve. Take pics and post so we can make sure.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Clacor
Single Turbo RX-7's
19
Sep 11, 2015 08:36 PM
<<Ayrton>>
Interior / Exterior / Audio
0
Sep 5, 2015 09:38 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 05:30 PM.