1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

bridgeport exhaust

Thread Tools
 
Search this Thread
 
Old 02-27-04, 10:43 PM
  #1  
Senior Member

Thread Starter
 
heb09's Avatar
 
Join Date: Dec 2003
Location: Australia
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
bridgeport exhaust

I'm currently running 2 1/2 piping with 2 turbo muflers. I want to get a new exhaust after speaking to a few ppl about it but I dont know what the best flow setup would be for a bridgeport. Would 3 inch with 2 turbo muflers be better? Or Better yet 1 mufler.

Cheers,
heb.
Old 02-27-04, 11:36 PM
  #2  
Senior Member

iTrader: (3)
 
jonfc3s's Avatar
 
Join Date: Feb 2003
Location: Cocoa, FL
Posts: 602
Likes: 0
Received 0 Likes on 0 Posts
I would leave the 2 1/2,... and just do one muffler. That is what I have on my 12a extended bridge now,... works great, little loud though.

Jonathan
Old 02-27-04, 11:41 PM
  #3  
Senior Member

Thread Starter
 
heb09's Avatar
 
Join Date: Dec 2003
Location: Australia
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
what about duel pipes?
Old 02-28-04, 05:17 AM
  #4  
Full Member

 
deeman111's Avatar
 
Join Date: Jul 2002
Location: Perth, Western Australia
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Hey
I have a 12A Bridgeport. I currently have a set of 2 2/4' extractors going into dual 2 1/4' pipes with a long resonator and a short one in each pipe (4 resonators all up), then joins into a 2 1/2 and goes over the diff to a magnaflow muffler with 2 1/2' tip

On the stock engine it was the quietest RX7 i knew of, and still had a nice tune, and with the bridgey, still sounds good but im kinda going deaf

-James
Old 04-16-04, 10:22 AM
  #5  
Blood, Sweat and Rotors

iTrader: (1)
 
DriveFast7's Avatar
 
Join Date: Aug 2001
Location: California
Posts: 3,742
Received 1 Like on 1 Post
Originally posted by deeman111
Hey
I have a 12A Bridgeport. I currently have a set of 2 2/4' extractors going into dual 2 1/4' pipes with a long resonator and a short one in each pipe (4 resonators all up), then joins into a 2 1/2 and goes over the diff to a magnaflow muffler with 2 1/2' tip

On the stock engine it was the quietest RX7 i knew of, and still had a nice tune, and with the bridgey, still sounds good but im kinda going deaf

-James
Approx how many inches long are the long and short resonators?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ian_D
New Member RX-7 Technical
6
09-06-15 10:38 PM
doritoloco
New Member RX-7 Technical
7
09-05-15 12:41 PM



Quick Reply: bridgeport exhaust



All times are GMT -5. The time now is 09:52 AM.