1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Brake lights not working.

Thread Tools
 
Search this Thread
 
Old Aug 30, 2011 | 04:44 PM
  #1  
Colbskee's Avatar
Thread Starter
Full Member
 
Joined: Apr 2011
Posts: 150
Likes: 0
From: Victoria, BC, Canada
Brake lights not working.

Ok.. weird things have been happening.


A while ago my brake lights randomly stopped working. I figured it was the bulbs, replaced them, still nothing.

Checked the harness for power, nothing. Checked all the grounds and they look good. Then i did some research, Found out about the "Stop Light checker" relay pulled it out, tested it to see if it worked. Doesnt work.

But the weird thing is, before i found out about the stop lamp checker, the brake lights would sometimes work, and sometimes not. By that i mean, If i hit the pedal after not using the brakes for a short time, the lights would not light up, but if i hit the pedal a few times, the lights would work for about 4-5 pumps.

I think it's either the brake light switch, The Stop Lamp Checker, or a ground im missing somewhere. If someone could direct me to a place that i could order the stop lamp checker from, that would be greatly appreciated, as I cannot find a place my self. I have not yet gone to mazda because i am terrified at what they will charge me.

Thanks in advance, Colby.

EDIT: The relay i pulled from the car has the following markings.

One side of the relay says:
BA01
RELAY-
CHECK
LAMP
12V27Wx4

Next side says:
2F17

Next side says(believe this is the part #):
A BA01 67 660

not sure if that info will help at all..

Last edited by Colbskee; Aug 30, 2011 at 04:58 PM.
Reply
Old Aug 30, 2011 | 07:10 PM
  #2  
Colbskee's Avatar
Thread Starter
Full Member
 
Joined: Apr 2011
Posts: 150
Likes: 0
From: Victoria, BC, Canada
Update.. fixed them. Was brake switch.
Reply
Old Aug 30, 2011 | 08:54 PM
  #3  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
No help like self help; Good job.
Reply
Old Aug 31, 2011 | 12:30 PM
  #4  
Colbskee's Avatar
Thread Starter
Full Member
 
Joined: Apr 2011
Posts: 150
Likes: 0
From: Victoria, BC, Canada
update with a new issue here..

When i hit the brake pedal and the engine is at less than 3000rpm, the stop lamp light on the dash appears. not sure why it would do that, i checked my bulbs again and they are not burnt out.
Reply
Old Aug 31, 2011 | 12:51 PM
  #5  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
Check your voltage at the battery at idle; you may be under spec due to a weak alternator, or (more likely) your chassis ground connections need cleaning up.
Reply
Old Aug 31, 2011 | 12:52 PM
  #6  
Colbskee's Avatar
Thread Starter
Full Member
 
Joined: Apr 2011
Posts: 150
Likes: 0
From: Victoria, BC, Canada
will do. thanks.
Reply
Old Sep 1, 2011 | 11:46 AM
  #7  
Colbskee's Avatar
Thread Starter
Full Member
 
Joined: Apr 2011
Posts: 150
Likes: 0
From: Victoria, BC, Canada
took a video of the problem after cleaning up the grounds and such. thinking it has to do with the alt.

heres the video, you can see that it kind of pulses and fades in and out. It's weird..

http://www.youtube.com/watch?v=cet85MmEhio
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
fastsaab
New Member RX-7 Technical
5
Aug 19, 2015 11:42 AM




All times are GMT -5. The time now is 05:22 AM.