Black Dragon rear wing
05-10-06, 01:54 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: sweden
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Black Dragon rear wing
Is there anyone on this forum who has this wing on his/her car?
http://www.blackdragonauto.com/icatalog/rx/0034.html
Partsnumber. 96-463
I´m curious about this wing as a possible replacement for the stock rubberwing that used to be fitted on my car.
So, if you happen to have any experience of fitting this wing and also a couple of nice pictures to show what it REALLY looks like, please post it or PM me.
/FB
http://www.blackdragonauto.com/icatalog/rx/0034.html
Partsnumber. 96-463
I´m curious about this wing as a possible replacement for the stock rubberwing that used to be fitted on my car.
So, if you happen to have any experience of fitting this wing and also a couple of nice pictures to show what it REALLY looks like, please post it or PM me.
/FB
05-10-06, 03:39 PM
#2
7-less
Join Date: Dec 2005
Location: No. Virginia, USA
Posts: 2,053
Likes: 0
Received 0 Likes
on
0 Posts
From the looks of it, the company has made the correct measurements to ensure it'll sit on the decklid without a problem. And, it looks like it's sloped enough to allow your hand to slip under the crevice for the glass hatch to open it, too. I'd say you won't have any problem at all.
And, by stock rubber wing, you don't mean that big wrap around wing are you?
And, by stock rubber wing, you don't mean that big wrap around wing are you?
05-11-06, 01:35 AM
#3
Junior Member
Thread Starter
Join Date: Aug 2003
Location: sweden
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 85 FB
From the looks of it, the company has made the correct measurements to ensure it'll sit on the decklid without a problem. And, it looks like it's sloped enough to allow your hand to slip under the crevice for the glass hatch to open it, too. I'd say you won't have any problem at all.
And, by stock rubber wing, you don't mean that big wrap around wing are you?
And, by stock rubber wing, you don't mean that big wrap around wing are you?
It´s not that big, but that´s the one. You can see it on the car in my avatar.
The original wrap-around is in a bad condition and I can´t seem to find a decent replacement for it, so therefore I´m interested in replacing it with the mentioned Black Dragon wing. But it all comes down to how it would look on the car...
05-11-06, 06:05 AM
#5
7-less
Join Date: Dec 2005
Location: No. Virginia, USA
Posts: 2,053
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Aneby
Thank´s for your answer, 85 FB!
It´s not that big, but that´s the one. You can see it on the car in my avatar.
The original wrap-around is in a bad condition and I can´t seem to find a decent replacement for it, so therefore I´m interested in replacing it with the mentioned Black Dragon wing. But it all comes down to how it would look on the car...
It´s not that big, but that´s the one. You can see it on the car in my avatar.
The original wrap-around is in a bad condition and I can´t seem to find a decent replacement for it, so therefore I´m interested in replacing it with the mentioned Black Dragon wing. But it all comes down to how it would look on the car...
http://www.mariahmotorsports.com/ Mariah is one company, go under Exterior, then Individual Aero Body Parts, and look for "Mariah Mode One - Wide Body Rear Lip Spoiler" That should be a replicant of what you have.
There was another that was offering a limited amount but I can no longer find them. Do also keep in mind that shipping a wing will probably require another $100 give or take to ship it via Freight, as most companies do that. Whichever wing you go for, be sure to take lots of pictures to show how it looks.
05-11-06, 07:34 AM
#6
On the prowl for an FB
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by Aneby
Is there anyone on this forum who has this wing on his/her car?
http://www.blackdragonauto.com/icatalog/rx/0034.html
Partsnumber. 96-463
I´m curious about this wing as a possible replacement for the stock rubberwing that used to be fitted on my car.
So, if you happen to have any experience of fitting this wing and also a couple of nice pictures to show what it REALLY looks like, please post it or PM me.
/FB
http://www.blackdragonauto.com/icatalog/rx/0034.html
Partsnumber. 96-463
I´m curious about this wing as a possible replacement for the stock rubberwing that used to be fitted on my car.
So, if you happen to have any experience of fitting this wing and also a couple of nice pictures to show what it REALLY looks like, please post it or PM me.
/FB
My wing > all other wings.
05-11-06, 09:40 AM
#7
Full Member
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Aneby....
I have a similar wing on one of my Rx7s. The wing my Rx7 has is a 3 piece metal one and unfortunately someone last week ripped the pieces that go on the end of each side.
I have a similar wing on one of my Rx7s. The wing my Rx7 has is a 3 piece metal one and unfortunately someone last week ripped the pieces that go on the end of each side.
Trending Topics
05-14-06, 03:37 PM
#8
Junior Member
Thread Starter
Join Date: Aug 2003
Location: sweden
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
85 FB: Thanks for the great Mariah-info.
So, I´ll wait then 
Rxcalibur: Thanks for the pictures. You wouldn´t happen to have a picture taken from any other angle? To bad to hear about yet another RX-7 being damaged by some envious ***holes, by the way!
Originally Posted by $100T2
Or, you could wait to see the wing I'm designing, decide you like it better, and buy one when it goes into production.
My wing > all other wings.
My wing > all other wings.
Rxcalibur: Thanks for the pictures. You wouldn´t happen to have a picture taken from any other angle? To bad to hear about yet another RX-7 being damaged by some envious ***holes, by the way!
05-14-06, 09:05 PM
#10
Roll to Heaven in a RX-7
Join Date: Feb 2005
Location: New Westminster, B.C - Canada
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by $100T2
Or, you could wait to see the wing I'm designing, decide you like it better, and buy one when it goes into production.
My wing > all other wings.
My wing > all other wings.
ooooo... i cant wait to see this, you have aready done so many upgrades to these cars
05-15-06, 10:26 AM
#11
On the prowl for an FB
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by rxtory
ooooo... i cant wait to see this, you have aready done so many upgrades to these cars
08-02-06, 02:19 AM
#13
Junior Member
Thread Starter
Join Date: Aug 2003
Location: sweden
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by $100T2
Or, you could wait to see the wing I'm designing, decide you like it better, and buy one when it goes into production.
My wing > all other wings.
My wing > all other wings.
