Big Problems With My Carb
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: ohio
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Big Problems With My Carb
i got my 85 rx-7 about 2.5 years ago, and hav never drove it an inch
you see, when i got it some bimbo had the carb off it, i rebuilt it and am trying to put it back on, but i cant figure out the vacuum hoses. could someone please send me an vacuum hose diagram?
i have a hanes manual, but its really vauge about later models
pilgrims@jmzcomputer.com
you see, when i got it some bimbo had the carb off it, i rebuilt it and am trying to put it back on, but i cant figure out the vacuum hoses. could someone please send me an vacuum hose diagram?
i have a hanes manual, but its really vauge about later models
pilgrims@jmzcomputer.com
#2
Rexy so sexy...
Join Date: May 2004
Location: midwest
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Just plug em all off at the carb. Unless you really want it to be stock...
Should be a diagram of vacuum stuff on the hood, but other than that I dunno what to tell you. Maybe someone else has a good set of diagrams.
Should be a diagram of vacuum stuff on the hood, but other than that I dunno what to tell you. Maybe someone else has a good set of diagrams.
#4
Rexy so sexy...
Join Date: May 2004
Location: midwest
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
All of mine are plugged, and it runs well. I do need to hook up one or two things, like vacuum advance, but other than that the rest of the stuff is not required. Try it and see.
#5
Originally Posted by MazdaBane
i kinda figured that it would run like crap if i plugged them all
u think that it would be fine?
u think that it would be fine?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM