banjo block

Reply Subscribe

Thread Tools

Search this Thread

May 18, 2006 | 03:29 PM

craigw1

Thread Starter

Senior Member

Joined: Aug 2004

Posts: 315

Likes: 2

From: cape town, south africa

banjo block

are any of you guys using this to tap into for oil pressure and oil temp gauges ?

its something I saw on the Yaw website.

Attached Thumbnails

May 18, 2006 | 03:44 PM

Hades12

Burning Oil-Grinding 3rd

Joined: Apr 2002

Posts: 4,094

Likes: 1

From: Union Mills NC

rx8?

I have one of the replacement pedistals from Billy, But I have not installed it yet.

May 18, 2006 | 05:07 PM

trochoid

Old Fart Young at Heart

iTrader: (6)

Joined: Apr 2004

Posts: 15,145

Likes: 8

From: St Joe MO

If you don't wish to buy extra parts, you can cut the mushroom head off the stock op sending unit and tap it. Temp can be tapped on the back side of the waterpump housing.

May 18, 2006 | 08:56 PM

craigw1

Thread Starter

Senior Member

Joined: Aug 2004

Posts: 315

Likes: 2

From: cape town, south africa

sorry, meant oil temp

May 19, 2006 | 12:19 AM

Rogue_Wulff

Too old to act my age

Joined: Feb 2005

Posts: 3,164

Likes: 0

From: Tulsa, Ok.

You can easily drill and tap the banjo bolt holding the rear oil cooler line to the motor. All this costs, is the cost of 2 sealing washers, and a bit of time.