Any pics of the Bonez exhaust system?
12-02-03, 04:47 AM
#1
What?
Thread Starter
Any pics of the Bonez exhaust system?
Does anyone have pictures of the Bonez Cat System installed? I would like to know how it looks and how it hooks into the exhaust manafold. Thanks
John
John
12-02-03, 05:05 PM
#2
Full Member
Join Date: Jan 2002
Location: Davis, CA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
I don't have any pics, but one end bolts right to the stock manifold (I needed a couple extra washers to get the nuts to not bottom out on the studs) and the other end bolts to the stock midpipe. WHole shebang is supported on the stock hangers.
Mine rubs a little bit on the heatshielding between the silencer and the body, I haven't gotten motivated enough to unbolt everything and "clearance" the heatshield.
The other issue was that the air pipe for the cat isn't flanged, like the stock cat, so you either have to cut the flange off the car side and use the supplied hose to connect them, or have your local muffler shop weld on a flange.
Mine rubs a little bit on the heatshielding between the silencer and the body, I haven't gotten motivated enough to unbolt everything and "clearance" the heatshield.
The other issue was that the air pipe for the cat isn't flanged, like the stock cat, so you either have to cut the flange off the car side and use the supplied hose to connect them, or have your local muffler shop weld on a flange.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
