another carb question
Thread Starter
Full Member
Joined: Mar 2007
Posts: 62
Likes: 0
From: hagerstown md
another carb question
i just got finished ripping my carb apart and putting back together and have no idea where to start with the mix and idle screws. where is a good starting point to just get the car started so i can adjust?
djessence
Joined: Aug 2007
Posts: 2,063
Likes: 0
From: Alberta, Canada
here is the link for all the manusals. FSM's at the top, carb manual about halfway down
http://www.wankel.net/~krwright/cars/rx7/manuals.html
I was bored sooo i read through the carb manual and it doesnt tell you per se a good starting point with the screws sooo just thought id save you some time in that respect....but still useful to have as a reference
I seem to recall 3.5 turns out from full in. BUT i am not 100%.
http://www.wankel.net/~krwright/cars/rx7/manuals.html
I was bored sooo i read through the carb manual and it doesnt tell you per se a good starting point with the screws sooo just thought id save you some time in that respect....but still useful to have as a reference
I seem to recall 3.5 turns out from full in. BUT i am not 100%.
Last edited by djessence; Feb 11, 2008 at 08:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM