85 rx7 rear carpet?
#1
85 rx7 rear carpet?
Hey does anybody know where I can gef a new rear carpet for my 85 rx7 burgundy interior. I need the entire rear carpet new and also the rear. Trunk cover carpet. Anybody know where I can possibly brinv my old ones for the mold so I can get them made?
#4
I replaced mine myself. Its alot of work to make it look nice. But I bought some carpet from overtons.com. They're a boating store, so the carpet is made for being in the sun, and the rear carpet is kinda in the sun. Doesn't cost much either. I think I used the color "wine" But I don't remember. It matches mostly, At least it looks better than the nasty sun eaten carpet that was there. Sometime I'm gonna try to finish the edges somhow, but I just haven't yet.
EDIT: The cost of the carpet was pretty cheap.
EDIT: The cost of the carpet was pretty cheap.
#5
Tom Cinnamon
Join Date: Nov 2006
Location: Port Perry Ontario
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
I just replaced the entire carpet from Auto Carpet for Car, Truck, Van - Stock Interiors
Their carpets are molded from an original floor pan for your particular make and model. in the case of a first gen RX7, unlike the three piece factory carpet, it came in two pieces. Ordered separately, 0ne for the main passenger area (factory is two pieces) and one for the the rear deck. They do not sell the crappy piece that hangs down from the hatch opening and covers the jack and tail lights. For this I ordered an xtra yard of carpet and made panels that I covered rather than have the loose curtain effect.
To replace the main passenger area I found it best to remove the two center consoles, shifter and Ebrake handles. This piece came with about 3 inches of xtra material all the way around.
The rear section had a bound border and was a pretty close fit.
A week ago, I switched the burgundy carpet for black and painted all the tan black. Was a time consuming job to get all the cut outs perfect, but it looks awesome.
good luck
Their carpets are molded from an original floor pan for your particular make and model. in the case of a first gen RX7, unlike the three piece factory carpet, it came in two pieces. Ordered separately, 0ne for the main passenger area (factory is two pieces) and one for the the rear deck. They do not sell the crappy piece that hangs down from the hatch opening and covers the jack and tail lights. For this I ordered an xtra yard of carpet and made panels that I covered rather than have the loose curtain effect.
To replace the main passenger area I found it best to remove the two center consoles, shifter and Ebrake handles. This piece came with about 3 inches of xtra material all the way around.
The rear section had a bound border and was a pretty close fit.
A week ago, I switched the burgundy carpet for black and painted all the tan black. Was a time consuming job to get all the cut outs perfect, but it looks awesome.
good luck
#6
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,835
Received 2,604 Likes
on
1,847 Posts
i bought the last 3 new ones from Mazda, and i still have one.
Trending Topics
#11
Rotary Haven
iTrader: (8)
I just replaced the entire carpet from Auto Carpet for Car, Truck, Van - Stock Interiors
Their carpets are molded from an original floor pan for your particular make and model. in the case of a first gen RX7, unlike the three piece factory carpet, it came in two pieces. Ordered separately, 0ne for the main passenger area (factory is two pieces) and one for the the rear deck. They do not sell the crappy piece that hangs down from the hatch opening and covers the jack and tail lights. For this I ordered an xtra yard of carpet and made panels that I covered rather than have the loose curtain effect.
To replace the main passenger area I found it best to remove the two center consoles, shifter and Ebrake handles. This piece came with about 3 inches of xtra material all the way around.
The rear section had a bound border and was a pretty close fit.
A week ago, I switched the burgundy carpet for black and painted all the tan black. Was a time consuming job to get all the cut outs perfect, but it looks awesome.
good luck
Their carpets are molded from an original floor pan for your particular make and model. in the case of a first gen RX7, unlike the three piece factory carpet, it came in two pieces. Ordered separately, 0ne for the main passenger area (factory is two pieces) and one for the the rear deck. They do not sell the crappy piece that hangs down from the hatch opening and covers the jack and tail lights. For this I ordered an xtra yard of carpet and made panels that I covered rather than have the loose curtain effect.
To replace the main passenger area I found it best to remove the two center consoles, shifter and Ebrake handles. This piece came with about 3 inches of xtra material all the way around.
The rear section had a bound border and was a pretty close fit.
A week ago, I switched the burgundy carpet for black and painted all the tan black. Was a time consuming job to get all the cut outs perfect, but it looks awesome.
good luck
I bought carpet from them as well, but have yet to install it. Any tips. Ive read from some people it was a real bitch to put it in. I couldnt imagine it being too bad for the average builder.