Dynomax 17296 Ultra Flow Muffler In/Out: 3"

race bullet muffler is also made my Dynomax #24222

Change of plans but running......
 

Well I decided to to replace the stock turbo for a Garrett GT67, I will also be using e85 instead of gas, Got her running about a month ago and should be on the dyno soon.....:icon_tup:

Video of car running
 

What boost controller are you using?

I have a quetion how much will a setup like that cost.I have a 84 gsl and put on a gsl-se suspension on it,i like where your going with this.thank's if you replay..

looking good! cant wait till you take it to the track.

Im using a greedy manual boost controller, Cost? thats a trick question, I did all the work myself from engine building to exhaust and so on, I should be playing at the track in a couple of weeks...

this car should be in the low 11s high 10s no problem , lets see how it all works out KEEP US INFORMED JOSE

I aggree with Manny, I'm running low 12's in an my all motor 12a, so this car should have no problems getting into the 11's. The only thing that you may have problems with is the stock rearend. If you use slicks, kiss the axles/ring and pinion goodbye. Looks really good. :icon_tup:

Thanks guys, hope rearend holds up a couple runs....

Very nice. What are the dimensions of that intercooler?

with that turbo you should have no problem running 14's .

wanna line up with this one?
http://sevenstock.org/Photos/Sevenst...S_DSC_0521.JPG
http://sevenstock.org/Photos/Sevenst...S_DSC_0520.JPG

The new rotorholic
 

NO But maybe with this one once its done.....
http://www.mazdadragracing.com/P5_rolling.JPG

its about time you got back on track , i ma be in orlando next week on a t & t session and also shooting the shit with tito so ima check the wagon out :icon_tup::icon_tup:so where is the old r100 these days ? i remember the r100 shooting to the left the couple of times that i got to see it , great looking car :icon_tup::icon_tup::icon_tup:

some of the guys around here dont know jose but i know that he can put some shit 2guether i have no doubt this rx7 will get some good numbers

Thanks manny, Just been trying to get my money right, its a little hard these days but things are looking better now, car is basiclly the same besides being a little more rusty, tito is a busy man with a few cars before he gets to mine. Old r100 was sold as a roller years ago to some guys in chicago and my old power plant is in marios full chassie r100 back in CA, I seen videos of the car, he doesnt seem to have the same power when I had it in my car or maybe the boost is still set low....

i hear that mang after the new house and all my honey doo list i had no time or cashflow to play with the car , i think the last time i was out was when u saw it at pomona :icon_tdow but its time to start pissing people of again and iam really good at that , ima be renting out a couple of tracks this year and i hope some of our west coat rotor heads show up or at least bench race since thats what they do the most :lol: also get a couple of grudge match races goin on just to bring some revenew for the pay out and the next races you know , give back to the racers like they use to do , i dont wana have any pro teams or factory backed up guys at all , keep it grass roots :icon_tup:

Manny, you know I'll be there!!!!!!!

rotorholic, what are the plans for the wagon as far as finished project ET?

plans....
 

rotorholic, what are the plans for the wagon as far as finished project ET?[/QUOTE]

I see no reason why the car shouldnt run mid 7s after a few outings, that ofcoarse is not the end :)

Loving those slick on stockies

I see no reason why the car shouldnt run mid 7s after a few outings, that ofcoarse is not the end :)[/QUOTE]

:lol::lol::lol: hell yeah i dont see why it should not do it , best of luck with that beast , so whats up with the 7

:icon_no2: no u wont u fruit :lol::lol::lol:

:lol::lol::lol: hell yeah i dont see why it should not do it , best of luck with that beast , so whats up with the 7[/QUOTE]

Gotta make it to ari's to dyno it, good to have him 15 mins away from me :) I will post up some videos after....

Gotta make it to ari's to dyno it, good to have him 15 mins away from me :) I will post up some videos after....[/QUOTE]

cool , :icon_tup::icon_tup: