I had to get a custom chassis harness for my build. One problem I ran into is the switches (turn signals, headlights, etc). I have the FSM but can't make sense of it. Can someone please help me identify all these wires so I can connect them. I know green with no stripe is the horn but the rest are lost to me.

thank you

 

Left go through an example. This will help you learn how to do it.

Section "F" is for the "Signal Light System." The schamtic shows F02 as the connector. The box labels F02 is the one we're looking for. Its shows GR (Green Red) and GO (Green Oragnge) are the colors on the connector that goes to the from and rear lights. Just below the scheamtic is a connector pin-out that shows the position of each pin and the color.