1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

3000 idle

Thread Tools
 
Search this Thread
 
Old Apr 25, 2004 | 08:22 AM
  #1  
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 4
Likes: 0
From: Kitchener, Ont
3000 idle

Intros 1st, names Barry go by Bare. Joined the club a few months ago-I have a '79 and two '87 TII's-love all the info here. I've checked the archives and done the searches and can't find exactly what I'm after so here goes. I got the '79 a while ago (unfit), the carbs been rebuilt but the only way it starts consistantly is by pouring gas down the carb while cranking it over. When it does start, the idle shoots to about 3000 rpm. It can rev higher but it won't drop below that. I can't even drop the rpm's manually with any linkage I can find. Any ideas? BTW I'll try to keep the posts shorter next time.
Reply
Old Apr 25, 2004 | 11:20 AM
  #2  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
what kind of carb are you using? sounds to me like a sticky throttle plate or something to do with the dashpot. perhaps more info..
Reply
Old Apr 25, 2004 | 12:07 PM
  #3  
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 4
Likes: 0
From: Kitchener, Ont
It's a Nikki carb.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
NLPerformance
1st Generation Specific (1979-1985)
10
Oct 2, 2015 07:11 AM
Thor 18
3rd Generation Specific (1993-2002)
5
Sep 28, 2015 07:35 PM
subeone
General Rotary Tech Support
0
Sep 24, 2015 09:58 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 08:40 PM.