2nd gen brake sys
#2
Got Boost?
Huh? Not entirely sure what your question is, but if it is: Can I put 2nd gen brakes on my first gen by just swaping out the "brakets", and master, then No... Its a bit more complicated than that. The brakets are part of the steering knuckle. The discs are part of the hub on a first gen, and the 2nd gen hubs don't swap onto the first gen spindles. The spindles are part of the strut, which is also the mount for the steering knuckle.
In short, unless you swap most or all of the suspension uncluding the steering, or have some significant custom machine work done, it won't work.
In short, unless you swap most or all of the suspension uncluding the steering, or have some significant custom machine work done, it won't work.
#3
Senior Member
Join Date: Feb 2004
Location: MIAMI,FL
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mazspeed.com/4pistonbrakeconversion.htm
HERE IS WHAT YOU ARE LOOKING FOR . IM TRYING TO DO THE SAME THING . ITS PRETTY HARD IF YOUR NOT A MACHINIST. IN THIS ARTICLE HE TELLS YOU STEP BY STEP , I WILL TRY MYSELF IN THE NEAR FUTURE. I HAVE A TURBO FB AND ITS REDICULOUS TRYING TO STOP IT . I BARELY DRIVE IT BECAUSE OF THAT REASON. HOPE THIS HELPS
HERE IS WHAT YOU ARE LOOKING FOR . IM TRYING TO DO THE SAME THING . ITS PRETTY HARD IF YOUR NOT A MACHINIST. IN THIS ARTICLE HE TELLS YOU STEP BY STEP , I WILL TRY MYSELF IN THE NEAR FUTURE. I HAVE A TURBO FB AND ITS REDICULOUS TRYING TO STOP IT . I BARELY DRIVE IT BECAUSE OF THAT REASON. HOPE THIS HELPS
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM