14x6.5 w/ 0offset fitment?
#1
Gen 1 4 life
Thread Starter
Join Date: Jul 2004
Location: Apalachin NY
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
14x6.5 w/ 0offset fitment?
would there be any fitment worries on 0 offset 14x6.5?
edit:: 4x110, its on an 81
edit:: 4x110, its on an 81
Last edited by ApG Spaz; 07-07-06 at 05:19 PM.
#2
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
It'll be kinda close, and you may need to roll the front fender lips if you have a lowered car.
Zero offset on a 6.5 wheel, equates to 3.25 backspacing, and 3.25 towards the front. This is very similar to the amount of wheel that sticks out on a 7" wheel with 4" backspacing. I have 15 x 7 wheels, with a +15 offset, which is very near to 4" backspacing.
Zero offset on a 6.5 wheel, equates to 3.25 backspacing, and 3.25 towards the front. This is very similar to the amount of wheel that sticks out on a 7" wheel with 4" backspacing. I have 15 x 7 wheels, with a +15 offset, which is very near to 4" backspacing.
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
imitek
3rd Generation Specific (1993-2002)
3
09-22-15 11:29 PM