12a Turbo GT42
 

Well this is the old set up http://www.meetup.com/members/3156456/photos/

This is the new set up
Chassis
-Ford 9 INCH
-strange axles
-aerospace brakes
-strange coil overs
-ladder bars
-26x8.5 mickey thompson
- ring and pinion Richmond
-strange Spool

Engine
-12a half bridge
-racing beat intake
-4 injectors TB
-880 primaries
-1600 secondaries
-aeromotive fuel pump
-aeromotive fuel filter
-custom turbo manifold and downpipe
-Garret GT42
-ECU microtech LT10

Thats all i remenber right now i would post the progres.Here some pics

http://img412.imageshack.us/my.php?i...mgp1722tv3.jpg
http://img177.imageshack.us/my.php?i...mgp1723np6.jpg
http://img177.imageshack.us/my.php?i...mgp1724uc9.jpg
http://img177.imageshack.us/my.php?i...mgp1725cy8.jpg
http://img177.imageshack.us/my.php?i...mgp1726nr5.jpg
http://img177.imageshack.us/my.php?i...mgp1728bt0.jpg
http://img177.imageshack.us/my.php?i...mgp1729el0.jpg

Diablo...BRUTAL!

That is a badass ride man, Im really diggin the suspension and those fat wheels/tires youve got tucked out back.
Looks like some quality work, I wanna see some vids of that thing on the track. Looks like its just about ready to kill the strip.

My one concern is the beehive oil cooler from the website pictures, hope thats gonna get the boot!

Sweet!!!!!!!!!!!!!!!!

Nice real nice...

Nice. Very nice. I am really impressed.

beehive on that setup? Did that work ok?

Wow, I'm in love, please keep everyone updated, that looks so MEAN

Yeah, I'm in total agreement with everyone else. The car is fantastic looking.

hell yes, lookin good!

Thanks everybody and yes on the new set up i will use a oil cooler from a Turbo II. Right now i have to put the engine together and then start fabricating the turbo mabifold and downpipe. All the work was done by my friend and I. The engine and Tunning the ECU in charge is Francho from Francho Performance.

Where are you in VA?

Also any info on Franco Performance. Will he tune Megasquirt?

I am looking to do a 6-port turbo with a custom turbo manifold to a stock or hybrid T2 turbo.

-Greg

That is bad ass! What throttle body are you using? is it like this one www.wwrturboinjection.com also, what is your ignition setup? Are you using an x4 ignition box with that lt10 or do you have some other ignition setup your using?

The throttle body is Only 4 Injectors and i got it from Puerto Rico so i really dont now the brand. On the ignition i a have distributor from a second gen and yes i have the X4 box with 4 msd coils blasters ss.

looking really good there bud ... i would like to see how that throttle body works out for you ... personally I'm going to get the one from Tweakit which is ITB so should be better for tuning I think.

nice diff swap, did you cut out the inner wheel arches to tuck the tires? do you have pics of the ladder bar mounting points on the unibody?

i will take pic of all that and post them so you can see it

couple pic

Here The GT42, Ecu microtech LT10s, X4box, 44mm Tial wastegate, 4 injectors Throttle body, 1600 cc AND 880 cc.

Strange axles? I don't get it.

very nice!!!

bad dude shit!!$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

nice set up , bori , i have a ford 7.5 on mine on a turbo project as well i went with the twm throttle body from rotaryshack and mosser axels ford racing lds and ring and pinion bears brakes on the rear and aerospace on front . but mine is for street use. hoping to get about 350 to the wheel with a t-66 turbo from master power. http://i39.photobucket.com/albums/e1...arparts053.jpg

http://i39.photobucket.com/albums/e1...arparts044.jpg

http://i39.photobucket.com/albums/e1...arparts047.jpg

damm bro sry on the hijack nice set up , y que viva puerto rico.

Thanks your looks real nice. Good luck

Roll cage
 

rollcage almost done.