|
12a Turbo GT42
Well this is the old set up http://www.meetup.com/members/3156456/photos/
This is the new set up Chassis -Ford 9 INCH -strange axles -aerospace brakes -strange coil overs -ladder bars -26x8.5 mickey thompson - ring and pinion Richmond -strange Spool Engine -12a half bridge -racing beat intake -4 injectors TB -880 primaries -1600 secondaries -aeromotive fuel pump -aeromotive fuel filter -custom turbo manifold and downpipe -Garret GT42 -ECU microtech LT10 Thats all i remenber right now i would post the progres.Here some pics http://img412.imageshack.us/my.php?i...mgp1722tv3.jpg http://img177.imageshack.us/my.php?i...mgp1723np6.jpg http://img177.imageshack.us/my.php?i...mgp1724uc9.jpg http://img177.imageshack.us/my.php?i...mgp1725cy8.jpg http://img177.imageshack.us/my.php?i...mgp1726nr5.jpg http://img177.imageshack.us/my.php?i...mgp1728bt0.jpg http://img177.imageshack.us/my.php?i...mgp1729el0.jpg |
Diablo...BRUTAL!
|
That is a badass ride man, Im really diggin the suspension and those fat wheels/tires youve got tucked out back.
Looks like some quality work, I wanna see some vids of that thing on the track. Looks like its just about ready to kill the strip. My one concern is the beehive oil cooler from the website pictures, hope thats gonna get the boot! |
Sweet!!!!!!!!!!!!!!!!
|
Nice real nice...
|
Nice. Very nice. I am really impressed.
|
beehive on that setup? Did that work ok?
|
Wow, I'm in love, please keep everyone updated, that looks so MEAN
|
Yeah, I'm in total agreement with everyone else. The car is fantastic looking.
|
hell yes, lookin good!
|
Thanks everybody and yes on the new set up i will use a oil cooler from a Turbo II. Right now i have to put the engine together and then start fabricating the turbo mabifold and downpipe. All the work was done by my friend and I. The engine and Tunning the ECU in charge is Francho from Francho Performance.
|
Where are you in VA?
Also any info on Franco Performance. Will he tune Megasquirt? I am looking to do a 6-port turbo with a custom turbo manifold to a stock or hybrid T2 turbo. -Greg |
That is bad ass! What throttle body are you using? is it like this one www.wwrturboinjection.com also, what is your ignition setup? Are you using an x4 ignition box with that lt10 or do you have some other ignition setup your using?
|
Originally Posted by hondahater
That is bad ass! What throttle body are you using? is it like this one www.wwrturboinjection.com also, what is your ignition setup? Are you using an x4 ignition box with that lt10 or do you have some other ignition setup your using?
The throttle body is Only 4 Injectors and i got it from Puerto Rico so i really dont now the brand. On the ignition i a have distributor from a second gen and yes i have the X4 box with 4 msd coils blasters ss. |
looking really good there bud ... i would like to see how that throttle body works out for you ... personally I'm going to get the one from Tweakit which is ITB so should be better for tuning I think.
|
nice diff swap, did you cut out the inner wheel arches to tuck the tires? do you have pics of the ladder bar mounting points on the unibody?
|
Originally Posted by Phiber Optik
nice diff swap, did you cut out the inner wheel arches to tuck the tires? do you have pics of the ladder bar mounting points on the unibody?
|
3 Attachment(s)
couple pic
|
4 Attachment(s)
Here The GT42, Ecu microtech LT10s, X4box, 44mm Tial wastegate, 4 injectors Throttle body, 1600 cc AND 880 cc.
|
Strange axles? I don't get it.
|
very nice!!!
|
Originally Posted by DogBox
Strange axles? I don't get it.
bad dude shit!!$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ |
nice set up , bori , i have a ford 7.5 on mine on a turbo project as well i went with the twm throttle body from rotaryshack and mosser axels ford racing lds and ring and pinion bears brakes on the rear and aerospace on front . but mine is for street use. hoping to get about 350 to the wheel with a t-66 turbo from master power. http://i39.photobucket.com/albums/e1...arparts053.jpg
http://i39.photobucket.com/albums/e1...arparts044.jpg http://i39.photobucket.com/albums/e1...arparts047.jpg damm bro sry on the hijack nice set up , y que viva puerto rico. |
Originally Posted by boriqua51371
nice set up , bori , i have a ford 7.5 on mine on a turbo project as well i went with the twm throttle body from rotaryshack and mosser axels ford racing lds and ring and pinion bears brakes on the rear and aerospace on front . but mine is for street use. hoping to get about 350 to the wheel with a t-66 turbo from master power. http://i39.photobucket.com/albums/e1...arparts053.jpg
http://i39.photobucket.com/albums/e1...arparts044.jpg http://i39.photobucket.com/albums/e1...arparts047.jpg damm bro sry on the hijack nice set up , y que viva puerto rico. Thanks your looks real nice. Good luck |
Roll cage
4 Attachment(s)
rollcage almost done.
|
cono hay billetes . lol nice work bro.
|
I love it! But how wide are the rear slicks? It doesnt seem cut out,
|
Originally Posted by Latin270
(Post 6958878)
I love it! But how wide are the rear slicks? It doesnt seem cut out,
|
there is a guy local that does rotary work he's running a 12a, gt42 in a red starlet name is Nandi from around Chepos garage in Reading, PA. Runs like 8.60s no nitrous. whats your target ET for that setup?
|
Originally Posted by PaImportTuner
(Post 6960342)
there is a guy local that does rotary work he's running a 12a, gt42 in a red starlet name is Nandi from around Chepos garage in Reading, PA. Runs like 8.60s no nitrous. whats your target ET for that setup?
|
4 Attachment(s)
fuel tank and fuel pump in place.
|
nice work ... i wouldve thought a mini tub at least but your work looks real clean.
|
yes. i agree. i expected that there was so much work put into your rear suspension and fuel supply. it wreaks of simplicity, but it's a good stink. :)
|
1 Attachment(s)
Today i installed one of the engines that i had in my back yard. Now i am going to start building the exhaust manifold. Any ideas where to support the turbo. Right now i am going to try the water housing.
|
https://www.rx7club.com/attachment.p...1&d=1179856897
Looks like bugs bunny... :) (Intercooler = teeth) |
Originally Posted by Catatonik
(Post 7151445)
https://www.rx7club.com/attachment.p...1&d=1179856897
Looks like bugs bunny... :) (Intercooler = teeth) but when bugs bunny bites yo ass you will know what the real deal is about :rlaugh: kenn |
Nice setup!
|
are you running a panhard bar out back? i didnt see one. sweet setup man.
|
Originally Posted by stevensimon
(Post 7151595)
are you running a panhard bar out back? i didnt see one. sweet setup man.
|
Thats awesome love the rims!
|
Don't know if it was ask b4 but why go with a 12A an not 13B OR 3ROTOR????
|
nice car and it lookds like a nice sleaper...
|
Originally Posted by streetRx7
(Post 7173529)
Don't know if it was ask b4 but why go with a 12A an not 13B OR 3ROTOR????
|
Lemme guess....going for the 12A world record? If Dyson can run 8's in a 12A Rx2...I'm sure you can do equally well.
Best of luck...looks bad ass by the way! |
Originally Posted by Jaime Enriquez
(Post 7175235)
Lemme guess....going for the 12A world record? If Dyson can run 8's in a 12A Rx2...I'm sure you can do equally well.
Best of luck...looks bad ass by the way! |
4 Attachment(s)
manifold
|
MmmmMmm makes me want my car to be done? well they are never done but wish it was at the next step maybe next mounth... what is the 12a world record *evil grin*
|
a eso es un trabajo boricua se ve bnbnbnbnbn 12a es mas duro q 13b buena suerte con el proyecto http://videos.streetfire.net/categor...230000422e.htm all motor en atlanta buena suerte
|
new dereck 12a on P.R http://68.178.140.70/videos/07-01-27-115.wmv
|
| All times are GMT -5. The time now is 04:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands