want to know what your FB will look like before hand?
12-03-08, 11:29 PM
#1
Full Member
Thread Starter
Join Date: Feb 2008
Location: North Carolina
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
want to know what your FB will look like before hand?
leave a picture and what you want done to it on here and ill do it in photoshop 
i need to do something to keep my free time at bay
i need to do something to keep my free time at bay
12-04-08, 10:12 AM
#2
Senior Member
iTrader: (1)
Join Date: Feb 2007
Location: Winnipeg
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Sweet deal. Always wanted someone to do this stuff for me. I don't have the time/patience/know-how for photochops. How about digitally adding a set of Respeed Coilovers for me (1.5-2" drop. Whatever looks best!)?
Then maybe a seperate pic with the same drop, a vented hood and some 18" wheels...?? I dunno how much time you need to kill, but if you could show me a bunch of different wheels on it it'd help me make up my mind for when it gets a different bolt pattern and bigger brakes... (Hopefully this winter sometime...)
12-04-08, 01:03 PM
#4
Full Member
Thread Starter
Join Date: Feb 2008
Location: North Carolina
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
this looks like a ok drop, 1.5ish inches, also made the colors a bit better
and what kind of rims did you have in mind?
and what kind of rims did you have in mind?
Last edited by littleredrotary; 12-04-08 at 01:17 PM.
12-04-08, 02:03 PM
#5
Senior Member
iTrader: (1)
Join Date: Feb 2007
Location: Winnipeg
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
I haven't given a ton of thought to the rims, since I want to do everything at once. Rims, rear end, bigger brakes, and coilovers are a lot of cash to save....
I've always been partial to something in a simple five spoke ...
Or
I don't think meshies would really suit, but I'm open to anything.
Don't go 18".. go 17"
Trending Topics
12-04-08, 09:29 PM
#12
Full Member
Join Date: Jun 2008
Location: Jacksonville,NC
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
lol...paint my stock rims black..but leave that little chrome lip..and then just do wahtever you want lol..
http://c1.ac-images.myspacecdn.com/i...ce5f19201c.jpg
OOO and give him a new paint job...lol
http://c1.ac-images.myspacecdn.com/i...ce5f19201c.jpg
OOO and give him a new paint job...lol
12-04-08, 10:53 PM
#13
im game for this.
Here you go. Lets start simple.
How about making the front bumper the same color as the car.
Then, give it the same color scheme as this car:
Im looking for a gunmetal top with a red pinstripe on the bodyline, and the stock silver the rest of the way down. Do the wheels the same gunmetal at the top half. Post a pic before and after the wheel color change. If you can, make the front caliper red.
Thank you.
Here you go. Lets start simple.
How about making the front bumper the same color as the car.
Then, give it the same color scheme as this car:
Im looking for a gunmetal top with a red pinstripe on the bodyline, and the stock silver the rest of the way down. Do the wheels the same gunmetal at the top half. Post a pic before and after the wheel color change. If you can, make the front caliper red.
Thank you.
12-04-08, 11:21 PM
#14
Junior Member
Join Date: Nov 2008
Location: Waco Tx
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
If you still have the time..
How about.. these wheels
on this car please..
Thank You
And rotaryboy
What brand rear lip/wing is that? and body kit.. your car looks great...
How about.. these wheels
on this car please..
Thank You
And rotaryboy
What brand rear lip/wing is that? and body kit.. your car looks great...
12-05-08, 02:18 AM
#16
Senior Member
iTrader: (1)
Join Date: Feb 2007
Location: Winnipeg
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! Front air dam is one that our local RX7 guru has a mold for. I think it's pretty similar to the Erebuni one. The body kit is custom. All made out of sheet metal... Had to shorten the lip to get it to line up. I had a good bodyman....
12-05-08, 02:46 PM
#20
Senior Member
iTrader: (1)
Join Date: Feb 2007
Location: Winnipeg
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
hey aws140..... 5-lug pattern. Explain please!
Big brakes or subframe swap?
If its Big brakes, how hard was the kit to install?
I want to do them, but I want a better rear end....
Big brakes or subframe swap?
If its Big brakes, how hard was the kit to install?
I want to do them, but I want a better rear end....
12-05-08, 03:08 PM
#21
Wankel Me This!!
nothing big how about just rims and one fun pic. i am only looking for the 2 main ones. what my car would look like with 15 inch rewinds and Bbombs from Koing.
http://tinypic.com/view.php?pic=21b6fdx&s=4
for the fun one how about slamed the the ground and on 20's?
http://tinypic.com/view.php?pic=21b6fdx&s=4
for the fun one how about slamed the the ground and on 20's?
12-06-08, 09:18 AM
#24
lwnslw-- thats the color scheme im definitely going with. im just not 100% sure on the color of the wheels yet.
rotaryboy23-- just as lwnslw said, www.re-speed.com complete conversion. very easy to install and awsome quality. if you want a stronger rearend, the moser axles add some strength, but if you are going to be pushing big power and using slicks, youll need to swap to a bigger rearend, or get creative. i plan on getting creative, once i need the strength, and then if that doesnt work ill go with a toyota 8" rearend.
how about we make things a lot simpilar? how about just making the front end silver? i just cant decide what color it needs to be.
rotaryboy23-- just as lwnslw said, www.re-speed.com complete conversion. very easy to install and awsome quality. if you want a stronger rearend, the moser axles add some strength, but if you are going to be pushing big power and using slicks, youll need to swap to a bigger rearend, or get creative. i plan on getting creative, once i need the strength, and then if that doesnt work ill go with a toyota 8" rearend.
how about we make things a lot simpilar? how about just making the front end silver? i just cant decide what color it needs to be.
