i have a 84 gs..i was looking at the jegs website and wanted to get some welds...i think the pattern is 4x110 but what size rim do i order cuz it says 4x1/2 and stuff like that..thanks guys..and pardon my ignorance

 

bump...help me guys...

 

GS will be 4x110mm. You cannot run 4x4.5inch, (4x114.3mm) unless you swap to the GSL-SE suspension.

 

ok..so whats the size of rim that i need to get..cuz i dont see the welds being sold in 4x anything just 41/2 and sizes like that

 

You need a 4x110mm bolt pattern. You also have to watch the offset, I run a 20mm offset.

 

ok..i understand what ur saying but i dont think u get what im saying...i look at the jegs website where i want to order the rims at and it doesnt say 4x110m it says 4 x 4-1/4'', 4-1/2'' and measurments like that...my question is..with the 4x110m rear which measurment do i get?

 

4x4.33070

 

you're question's been answered, but here's a little tip for future reference...

you can use google to do unit conversions
simply search Xorig_units in new_units
example
110mm to inches

 

Jegs does not sell 4X110 wheels. The 4X4-3/4 that you're looking at is the Imperial equivilent of the 4X114.3 metric bolt pattern that fits the GSL-SE. The numbers you quoted have nothing to do with rims size, only the bolt pattern or PCD.

The question you think you're asking, but aren't, is the rim width. Stock + pattern wheels are 13X5.5. Now, if you do find a site where you can order wheels with the 4X110 bolt pattern, please let the forum know.

 

in the machine shop they can change the bolt pattern that the way we do in puerto rico

 

take metric dimension and devide by 25.4 to get inches. 110/25.4=4.331. alittle over 4 21/64. the 4x110 pattern is hard to find in the aftermarket. u can use adapters to convert to a more available pattern or change to the gsl-se suspension. and like previously mentioned, a machine shop can redrill a set of wheels for the pattern u want.

 

I need to make a correction. 114.3 mm = 4.5", not 4-3/4"