Project update. 17s are in
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Winnipeg
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Project update. 17s are in
It's coming along. SLOWLY
Couldn't resist putting pictures up since I got the wheels.
Voxx mg-3 17x7
205/40 front
215/45 rear
Both Maxxis MA-Z1 tires
Nofords has been a huge help here, so props to him for answering my 10000+ text messages.
Specs:
2nd gen subframe swap to 5-bolt, 4-pistons, etc.
Poly everything up front,
stock 24mm turbo sway bar
RB 1st gen rear sway bar
91 NA 13B
Ebay Camber plates
KYB AGX adjustables front, 175-lb spring rate
Stock rear shocks. ...maybe illuminas yet
Rear Springs off a Mustang front 8cyl springs. (Will get changed out for 6 cyl or maybe 4 cyl springs)
Just ordered:
Poly 4 link / watts link / sway bar mounts for rear
full exhaust header > collector > 3" Moroso Spiral Flow > 2.5 " reducer > Thrush welded muffler > 2x6" polished stainless tip
Wilwood brake MC and proportioner.
Couldn't resist putting pictures up since I got the wheels.
Voxx mg-3 17x7
205/40 front
215/45 rear
Both Maxxis MA-Z1 tires
Nofords has been a huge help here, so props to him for answering my 10000+ text messages.
Specs:
2nd gen subframe swap to 5-bolt, 4-pistons, etc.
Poly everything up front,
stock 24mm turbo sway bar
RB 1st gen rear sway bar
91 NA 13B
Ebay Camber plates
KYB AGX adjustables front, 175-lb spring rate
Stock rear shocks. ...maybe illuminas yet
Rear Springs off a Mustang front 8cyl springs. (Will get changed out for 6 cyl or maybe 4 cyl springs)
Just ordered:
Poly 4 link / watts link / sway bar mounts for rear
full exhaust header > collector > 3" Moroso Spiral Flow > 2.5 " reducer > Thrush welded muffler > 2x6" polished stainless tip
Wilwood brake MC and proportioner.
Thread
Thread Starter
Forum
Replies
Last Post