Lowering the Seven need suggestions
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Lowering the Seven need suggestions
I'm going for look and function... i want to know what kits are out there for our cars...links for the kits are welcome...also interested to know what your running. Thanks in advance
#2
1/1 scale Hot Wheels
iTrader: (1)
I had the RESpeed front and rear coil over kits installed on my '79 . It sits 13" from center of hub to fender lip , so about 1' lower from stock . It is noticeable and looks great. Also rides on rails and no binding noise in the watts linkage or front end.
very satisfied with outcome.
very satisfied with outcome.
#4
1/1 scale Hot Wheels
iTrader: (1)
I don't have a pic of it lowered and it is away in storage for the winter. but FWIW, here is a side shot of stock height , try an imagine the fenders one inch lower front and back, the tires site snugly in the well and the front kamei air dam I have is only a few inches off the ground. , not much help I know , but he asked
I will take a similar shot next spring for comparison. I expect though the pictures won't really give the same impact as really seeing it , and getting into it , which is noticeably lower at first.
I will take a similar shot next spring for comparison. I expect though the pictures won't really give the same impact as really seeing it , and getting into it , which is noticeably lower at first.
#5
Lives on the Forum
I'm also running Respeed coilovers (www.re-speed.com) and am very happy with them. I have the race version, which lets you drop the car as low as you want. I could drop it all the way down to the frame rails if I wanted to.
Performance is outstanding, as is the customer support. Billy is a great guy to deal with.
Performance is outstanding, as is the customer support. Billy is a great guy to deal with.
#7
Full Member
Join Date: Dec 2002
Location: northwest ohio
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
What about the rear suspension? i thought respeed only had coilovers for the front.
edit: just looked at the site, sorry, i get it now. not true coilovers. i was confused how that was gonna work. cool tho. i want!
edit: just looked at the site, sorry, i get it now. not true coilovers. i was confused how that was gonna work. cool tho. i want!
Last edited by rotorheadguy; 10-16-08 at 07:14 PM.
Trending Topics
#8
Junior Member
Join Date: Sep 2008
Location: Nelson County, VA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
My buddy's 7 runs Eibach 1" drop springs with adjustable Konis up front and KYB GR-2s out back, looks and handles great. Bit too much rebound for my liking, but the Konis just need some tweaking.
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM