1st Gen General Discussion The place for non-technical discussion about 1st Gen RX-7s or if there's no better place for your topic

Enkei92

Thread Tools
 
Search this Thread
 
Old Jul 25, 2013 | 11:14 AM
  #1  
captainmorgan92's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 50
Likes: 0
From: Purdue Univ
Enkei92

Just wanted opinions on whether 15x7 enkei92s would look good on my FB. I don't want to touch the suspension and want to keep everything stock except for the wheels since 13" tires are getting hard to find. I am planning on getting adapters to either 4x100 or 4x114
Reply
Old Jul 25, 2013 | 11:19 AM
  #2  
Siraniko's Avatar
RX for fun
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,926
Likes: 25
From: Socal
imho it will look good specially with black face
Reply
Old Jul 25, 2013 | 11:37 AM
  #3  
Whizbang's Avatar
Respecognize!
Tenured Member 20 Years
 
Joined: Sep 2004
Posts: 4,106
Likes: 72
From: Anchor Bay, CA
its actually one of the more common "old school" wheels for the FB.

Reply
Old Jul 25, 2013 | 11:45 AM
  #4  
captainmorgan92's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 50
Likes: 0
From: Purdue Univ
I have red GS so thanks for that picture! I was leaning towards gold. Is that stock suspension whizbang? And what adapters or did you swap to GSLSE?
Reply
Old Jul 25, 2013 | 11:59 AM
  #5  
Glazedham42's Avatar
Resurrecting Gus
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jul 2003
Posts: 2,790
Likes: 6
From: Indiana
Originally Posted by captainmorgan92
I have red GS so thanks for that picture! I was leaning towards gold. Is that stock suspension whizbang? And what adapters or did you swap to GSLSE?
That's not his car in the picture, it's mine. He must have found my picture somewhere from an older thread and posted it. The wheels on my GS in that picture aren't even real, I photoshopped them on. However, I am actually putting this setup on my car at the moment. I have ground control coilovers, and GSL-SE suspension with 15x7 in the front and 15x8 in the back. You will have to switch to GSL-SE suspension unless you want to buy custom drilled wheels for megabucks.
Reply
Old Jul 25, 2013 | 12:24 PM
  #6  
captainmorgan92's Avatar
Thread Starter
Full Member
 
Joined: Nov 2012
Posts: 50
Likes: 0
From: Purdue Univ
Originally Posted by Glazedham42
That's not his car in the picture, it's mine. He must have found my picture somewhere from an older thread and posted it. The wheels on my GS in that picture aren't even real, I photoshopped them on. However, I am actually putting this setup on my car at the moment. I have ground control coilovers, and GSL-SE suspension with 15x7 in the front and 15x8 in the back. You will have to switch to GSL-SE suspension unless you want to buy custom drilled wheels for megabucks.
A friend of mine got adapters made for 250 bucks for all four corners so I was going to go that route I think. My car only has 60k on it and I want to keep it all original except for the wheels so I don't want to go too extreme on suspension.
Reply
Old Jul 25, 2013 | 12:25 PM
  #7  
Whizbang's Avatar
Respecognize!
Tenured Member 20 Years
 
Joined: Sep 2004
Posts: 4,106
Likes: 72
From: Anchor Bay, CA
ha! nice. i just googled it.

enkei did have 15" 92 in 110 back in the day. harder to find but you can.
Reply
Old Jul 25, 2013 | 08:09 PM
  #8  
aeenox's Avatar
Senior Member
Tenured Member: 10 Years
Liked
Loved
Community Favorite
 
Joined: Jul 2013
Posts: 339
Likes: 27
From: Los Angeles
They would look real nice. I wanna get set a Enkei Apaches havent seen a FB with them yet.
Reply




All times are GMT -5. The time now is 07:07 AM.