When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I made two small brackets that allowed me to mount in the stock location:
This is a shot of a different pump, but the one above is the one I ended up with:
This pump is also available from amazon, but produced too much pressure and overpowered the floats in the carb. The pump I went with pretty much mounted just like this one (I was able to use the same mounting brackets.
I did this several months ago, and haven't had any (fuel) issues since then - but, to be fair, I also have not driven it very much at all since replacing it.
Good luck.