(ELECTRICAL) Fusible Link Conversion Thread
#26
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Myc1972
Great tip!
How do i remove the fusible links without damaging them?
To keep them if they are still good, for an emergency?
How do i remove the fusible links without damaging them?
To keep them if they are still good, for an emergency?
#27
Rotary Enthusiast
Join Date: Jun 2002
Location: Yokosuka
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, looks good. I guess at one point the links were cheaper than the fuses.
I converted to the FC style a couple weeks back, though. I only have one slot left already! :-/
Those fusable links are teh sux for current flow..
I converted to the FC style a couple weeks back, though. I only have one slot left already! :-/
Those fusable links are teh sux for current flow..
#29
Seven Is Coming
iTrader: (1)
Matter of fact, heres the thread I started about these same things 3 years ago, when Mike told me he had been using them
https://www.rx7club.com/forum/showthread.php?t=143560
~T.J.
EDIT: Just wanted to add that you at least got them. I ended up just doing something different. You did a very nice write up that should be added to FAQ and the archive also, thanks .
https://www.rx7club.com/forum/showthread.php?t=143560
~T.J.
EDIT: Just wanted to add that you at least got them. I ended up just doing something different. You did a very nice write up that should be added to FAQ and the archive also, thanks .
#30
Seven Is Coming
iTrader: (1)
Ok, last thing. Heres the section from the FSM for the links. If you have an -SE, you have the extra block with two more links. One of them is the same as the two on the block we all have, so just get another 30 amp fuse. The other is a .5 sq link, and if .3 sq (mm?) = 30 amps (which it apparently does according to you and Mike), then .5 should equal slightly more than that, so maybe a 35 amp for your second one?
In summary, if you have an -SE, you should buy three 30 amps, one 60 amp, and one 35 amp. Someone needs to try it and let us know if it works though
~T.J.
In summary, if you have an -SE, you should buy three 30 amps, one 60 amp, and one 35 amp. Someone needs to try it and let us know if it works though
~T.J.
#31
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Waterloo & Mississauga, Ontario, Canada
Posts: 838
Likes: 0
Received 1 Like
on
1 Post
I've searched all over... but can't find any conversion rates from sq to amps. But if 1.25 = 60, and 0.3 = 30, then 0.5 probably shouldn't be too far off from 35 as RMD stated.
#33
Seven Is Coming
iTrader: (1)
Originally Posted by darkfrost
I've searched all over... but can't find any conversion rates from sq to amps. But if 1.25 = 60, and 0.3 = 30, then 0.5 probably shouldn't be too far off from 35 as RMD stated.
~T.J.
#34
I swear I didn't know.
iTrader: (2)
Join Date: Jul 2004
Location: Vic's Mom's House
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Ok I have run into a problem. I was in the process of taking the fuses off of my wrecked 90 GXL and putting them on. When I did I put a "30,60,30" on and all I got was a click and nothing. I replaced them all with the wired links until I got the "main" to work with a "60" but when ever I try to put a "30" in the others spot I just get a click so I had to put the wires back on. My setup is like this now, "wire, 60, wire" it is pretty "rigged" looking if you look at it, not uniform. ..... what is going on? No the pink "30" amp fuses are not blown.
#38
EliteHardcoreCannuckSquad
Join Date: May 2001
Location: Acton, Ontario, Canada
Posts: 4,126
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by Paradox
has anyone ever gotten a part # or a name to ask for these? i looked around at NAPA but couldnt find anything that looked similar.
They're commonly available at most autoparts stores...
#39
backyard tuner
iTrader: (1)
Join Date: Sep 2002
Location: BC, Canada
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
odd they are called fusible links aswell haha. thanks man, i'll try asking next time im at NAPA (soo... probably tommorow)
reason im asking is ive been hunting down a power drop in my car for weeks now, finally found where it was. now my battery is well above 300amps where it was at like 80 in the mornings, but there also seems to be a 10amp drop around the fusible links.. probably just corroded from age. these should help a bit.
reason im asking is ive been hunting down a power drop in my car for weeks now, finally found where it was. now my battery is well above 300amps where it was at like 80 in the mornings, but there also seems to be a 10amp drop around the fusible links.. probably just corroded from age. these should help a bit.
#40
EliteHardcoreCannuckSquad
Join Date: May 2001
Location: Acton, Ontario, Canada
Posts: 4,126
Likes: 0
Received 4 Likes
on
4 Posts
No problem... if you still can't find them at your store...
http://www.partsamerica.com/ProductL...Fusible%20Link
http://www.partsamerica.com/ProductL...Fusible%20Link
#41
Southwind Seven
Join Date: Nov 2003
Location: Kansas
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Part Numbers
Bussmann brand, I'm assuming this is a trade number and should be the same part number for other brands ie. LittleFuse...etc.
Correct me if I'm wrong...
FLF20 x 2, 3-for SE (Lt. Blue)
FLF40 x 1 (Green) (this should be a 45 amp according to the Service manual, I wouldn't use a 50 Amp)
FLF30 x 1 (Pink), For SE only
So they should be in this order from top to bottom...
20,40,20
for the extra 2 links on the SE's...
30,20
Correct me if I'm wrong...
FLF20 x 2, 3-for SE (Lt. Blue)
FLF40 x 1 (Green) (this should be a 45 amp according to the Service manual, I wouldn't use a 50 Amp)
FLF30 x 1 (Pink), For SE only
So they should be in this order from top to bottom...
20,40,20
for the extra 2 links on the SE's...
30,20
#42
Senior Member
Join Date: Oct 2002
Location: Eugene, Oregon
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
If anyone has bumped up there Alternator to the 2nd Higher Amp Output you might want to bump up your Main Fuse to the 60Amp (Middle One). I'm running 30-60-30 w/no problems.
One of these days I will upgrade to the 2 nd Gen Engine Fuse Box.
No biggie for now since I've installed the Painless Wire Weather Proof 7 Cirkit Boss Kit. Gives me an extra 4-Ign and 3-Constant Hot to run all my extra Goodies.
Great Info on the Buss Fuse Upgrade!
sgieldon
steve
One of these days I will upgrade to the 2 nd Gen Engine Fuse Box.
No biggie for now since I've installed the Painless Wire Weather Proof 7 Cirkit Boss Kit. Gives me an extra 4-Ign and 3-Constant Hot to run all my extra Goodies.
Great Info on the Buss Fuse Upgrade!
sgieldon
steve
#45
love the braaaap
Originally Posted by RotorMotorDriver
I dont think its a measure of electrical power, I too have searched. The only thing I can come up with is sq/mm is a cross section size used to determine wire size in some places (similar to our AWG system), and by using that number you could calculate the amount of current it could carry, but I was inconclusinve during this, so I just guessed on the size, lol
~T.J.
~T.J.
Moderators, please archive this. This is one of the best mods I have seen in quite a while and it would make a nice addition to the archives.
#48
The Shadetree Project
iTrader: (40)
So I went and bought some today and it's the best mod I've done lately! I bought new head lights last week cause one of mine blew out and I was not happy with how bright the sylvania silverstars were. Then I went from the old skool to new skool fuseable links and what a difference! My lights are so much brighter. And I'm getting 13v at idle instead of it bouncing around 12v. I highly recomend you go and get these fuses TODAY!!! I used 20, 40, and a 20 because I could not find a 45. So I went with a 40 and bought a 50 Just in case the 40 blew up, but it's working fine!