(DRIVETRAIN) Rebuilding my GSL-SE Rear end

 
Thread Tools
 
Search this Thread
 
Old 01-20-06, 07:06 PM
  #1  
Torqueless Wonder

Thread Starter
iTrader: (1)
 
cptpain's Avatar
 
Join Date: Oct 2004
Location: Texas
Posts: 2,020
Likes: 0
Received 3 Likes on 3 Posts
(DRIVETRAIN) Rebuilding my GSL-SE Rear end

recently during the drift events here in TX i have been noticing something... my lsd is going out i can barely hold a drift and when i launch the car one tire strip is longer than the other. i am planning on rebuilding my complete rear end with a new LSD. the only question is who makes one? I remember reading an article or something a while ago that a miata LSD from a certain year will fit into my pumpkin, is this true? once i get the rear end built i wanna see how much power it can handle with new ring and pinion, stronger axles, and a new LSD. i dont want to keep asking my friend to weld up open diffs or keep buying used GSL-SE lsd. any help would be great
cptpain is offline  
Old 01-20-06, 08:28 PM
  #2  
Senior Member

 
Join Date: Jan 2004
Location: Pittsburgh/Johnstown, PA
Posts: 476
Likes: 0
Received 0 Likes on 0 Posts
The 84-85 GSL rear diff is stronger than the SE. If you have both of them apart, the 3.909 ring and pinion from the GSL is considerably beefier.
BlastinSideways12A is offline  
Old 01-20-06, 08:38 PM
  #3  
lightened fb

 
autopaul's Avatar
 
Join Date: Aug 2004
Location: vancouver, bc
Posts: 480
Likes: 0
Received 0 Likes on 0 Posts
get a gsl diff like blastnisideways12a says,, or you could get a lsd rebuild kitt,, something i havent yet looked into, but i wanted to get one later in my build.. maybe someone can clarify,, while you have it out you mayaswell replace some bearings ( the side bearings can go and ruin your axles if your not careful... im going to do this before i put my car back on the road...

Paul
autopaul is offline  
Old 01-21-06, 12:08 AM
  #4  
Torqueless Wonder

Thread Starter
iTrader: (1)
 
cptpain's Avatar
 
Join Date: Oct 2004
Location: Texas
Posts: 2,020
Likes: 0
Received 3 Likes on 3 Posts
i understand the whole difference between the SE and GSL rears but i dont have a GSL nor can i get one around my area. i not only drift i also road race and drag so this rear is going to be punished to within an inch of its life. right now i havent done anything abusive to the car since october because i thats when i started to feel the rear start to wear out. i appreciate your input.
I know there was somewhere i read that an aftermarket or stock LSD for a miata bolted right up to the SE pumpkin i just dont remember where. if i cant figure this out then i might as well put a ford 8.8 in an just go draggin an driftin
cptpain is offline  
Old 01-21-06, 12:40 AM
  #5  
Rotoholic Moderookie

iTrader: (4)
 
vipernicus42's Avatar
 
Join Date: May 2002
Location: Ottawa, Soviet Canuckistan
Posts: 5,962
Received 29 Likes on 24 Posts
Here ya go, should help you out some:

http://mrmazda.no-ip.com/interchange.html

Jon
vipernicus42 is offline  
Old 01-21-06, 12:51 AM
  #6  
Rotoholic Moderookie

iTrader: (4)
 
vipernicus42's Avatar
 
Join Date: May 2002
Location: Ottawa, Soviet Canuckistan
Posts: 5,962
Received 29 Likes on 24 Posts
Expensive, but really cool diff upgrade:

http://www.gurumotorsports.com/

specifically:
http://www.xtremerotaries.com/main2/products/diff.htm

Discussed here:
https://www.rx7club.com/showthread.p...ght=miata+diff

Jon
vipernicus42 is offline  
Old 01-21-06, 01:14 AM
  #7  
Rotoholic Moderookie

iTrader: (4)
 
vipernicus42's Avatar
 
Join Date: May 2002
Location: Ottawa, Soviet Canuckistan
Posts: 5,962
Received 29 Likes on 24 Posts
Check this out:

https://www.rx7club.com/showthread.p...ght=miata+diff

Amazing what a single search on "miata diff" brings up eh?

Originally Posted by cptpain
if i cant figure this out then i might as well put a ford 8.8 in an just go draggin an driftin
You can do that, but if you can't figure out the search function, are you sure you can handle a rear end swap? That last one was even in the ARCHIVE!

And some info on differentials in general, torsens, miata diffs, gear ratios and a great spreadsheet:

https://www.rx7club.com/showthread.p...ght=miata+diff

Jon

Edit: There's one page I just CAN'T FIND! IIRC it's a black page with green writing detailing the swap of a miata rear into an Rx7.... Anybody know where it is?
vipernicus42 is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
02-26-19 02:04 AM
mazdaverx713b
Build Threads
48
04-21-16 06:45 AM
coltboostin
Rotary Drag Racing
0
08-20-15 11:37 PM



Quick Reply: (DRIVETRAIN) Rebuilding my GSL-SE Rear end



All times are GMT -5. The time now is 08:30 PM.