Speedway Engineering Sway Bars
Thread Starter
Full Member
Joined: Feb 2006
Posts: 175
Likes: 1
From: CHandler, AZ
Speedway Engineering Sway Bars
In a for sale post Howard Coleman posted about these swaybars:
It looks to me like they sell arms that are standard and must be made to fit. I'd like to get some FD insight into this. The site says the ends can be bent and then heat treated, so fitment should not be an issue.
http://www.1speedway.com/Swaybar_Arms.htm
http://www.1speedway.com/standard_swaybars.htm
you want the 608-188-35 or thereabouts bar w the proper bent alum arms. and some hardware.
hc
you want the 608-188-35 or thereabouts bar w the proper bent alum arms. and some hardware.
hc
http://www.1speedway.com/Swaybar_Arms.htm
Last edited by darkslide750; Jul 8, 2007 at 01:10 PM. Reason: link wrong
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
need RX7
2nd Generation Specific (1986-1992)
11
Aug 19, 2015 08:27 AM
